Abstract:To realize cost-effectively manufacture of high-performance Si3N4 porous ceramic, a ferrosilicon nitride porous ceramic with an optimized interlocking structure was synthesized by flash combustion synthesis using FeSi75 powder as raw material. And the technology has been improved in many ways to ensure stable industrial production. The theoretical combustion temperature of FeSi75 in N2(g) is up to 4608K, while Si3N4 is unstable. Both adding diluent and designing the preheat temperature of nitrogen are taken to control synthesis temperature below 1600 °C. During synthesis, the Fe–Si liquid phase and SiO(g), which are essential for the selective growth of elongated columnar β-Si3N4 and whisker α-Si3N4 respectively, are formed firstly. Then, nitriding proceed in multiple ways. N diffuses through Fe–Si(l) and reacts with Si to form β-Si3N4, and the growth of elongated β-Si3N4 in Fe–Si liquid follows the dynamic ripening model, which is very fast and effective. Thus, an interlocking structure composed of elongated β-Si3N4 with an aspect ratio above 20 is reached. There is also an indirect nitridation reaction, that is, FeSi75 preferentially reacts with trace O2 in atmosphere to form SiO(g), which is further nitrided to form needle-like α-Si3N4. Needle-like α-Si3N4 is interspersed in the well-developed columnar β-Si3N4, making the structure stronger. Fe finally exists in the form of Fe3Si, which binds the surrounding elongated Si3N4 to form a sea-urchin like unit, making the structure more stable and strengthened. Through control of these reactions, optimizations in microstructure are reached, and the annual output of has reached 25,000 tons. The reaction model is established.

Effect of Oxide Additives on Catalysis and Microstructure of RBSN Using Low-Purity Silicon Powder As Raw Materials

Catalytic Effect of Oxide Additives on Reaction Bonded Silicon Nitride Using Low-Purity Silicon Powder as Raw Materials

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Effects of ZrO 2 on the Nitridation Behavior and Mechanical Properties of Reaction-Bonded Si 3 N 4 /H-Bn Composite

Effect of Sm2o3 Additives on the Rod-Like Beta-Si3n4 Crystal of Porous Silicon Nitride Fabricated by Reaction-Bonded

Effect of Impurities MgO, CaO, Al2O3, AlN and Al on Α/β Ratio in Combustion Synthesis of Α-Si3n4

Effects of MgAl2O4-ZrO2 Addition on Sintering Behaviors and Mechanical Properties of Silicon Nitride Ceramics

Influence of Sintering Aids on the Nitridation of Reaction Bonded Si3n4/Bn Ceramics

Catalytic Preparation of Si3N4-Bonded SiC Refractories and Their High-Temperature Properties

Influence of sintering aids on the nitridation of reaction bonded Si 3N4/BN ceramics

The Effects of the Single Additive on the Fabrication of Rod-like β-Si3N4

Effect of ZrB2 and its oxide impurities (ZrO2 and B2O3) on hot-pressed Si3N4 ceramics at low temperature

The effects of the single additive on the fabrication of rod-like beta-Si3N4

Liquid-Phase-Assisted Catalytic Nitridation of Silicon and In Situ Growth of α-Si3N4

Effects of carbon coke additions on synthesis of ZrN-SiAlON from zircon and alumina by carbothermal reduction nitridation process

Catalytic Nitridation Preparation of High-Performance Si3N4(w)-SiC Composite Using Fe2O3 Nano-Particle Catalyst: Experimental and DFT Studies

Co-Catalyzed Nitridation Of Silicon And In-Situ Growth Of Alpha-Si3n4 Nanorods

Influence of Yttria–Alumina Content on Sintering Behavior and Microstructure of Silicon Nitride Ceramics

Effect of AlN and ZrO2 on the Microstructure and Property of the 2Si-B-3c-n Ceramic

In Situ Catalytic Synthesis of Si3N4 Nanowhiskers Reinforced SiC Refractories and Their High-Temperature Properties

Cost-effective manufacture and synthesis mechanism of ferrosilicon nitride porous ceramic with interlocking structure