Abstract:Abstract In this paper, we propose a thermal wind speed sensor Verilog-A model with thermal-fluid-electric hybrid characteristics. Because the structure of the thermal wind sensor and the interface circuit chip are designed separately, which cannot effectively carry out MEMS-IC (integrated circuit) co-simulation, the overall performance of the sensor and interface circuit chip is prone to large deviation. At the same time, the separation of MEMS structure and IC design process leads to long product development cycle and high cost. This paper proposes an improved simulation model by analyzing the behavior characteristics of the thermal wind speed sensor. The simulation model consists of 11 thermistors, 3 capacitors, a voltage-controlled voltage source, and a voltage-controlled current source. The Taylor series expansion of the differential equation of heat conduction is carried out, and then the thermistor and capacitor networks are established according to the corresponding relationship between the thermal parameters and the electrical parameters, including the thermal conduction unit, the convection unit and the heat capacity in the chip. The model fully considers the effects of various physical effects and parasitic effects, and is implemented using the hardware description language Verilog-A. The sensor and interface circuit can be simulated simultaneously to optimize the circuit design. It is beneficial to the integration of sensors and interface circuit, reducing the number of tape-outs, increasing the success rate, and reducing costs. The consistency between the simulation results and the experimental curves verified the correctness of the macro model. The behavior characteristics of constant power (CP) and constant temperature heating were described. In CP mode, the output voltage error is less than ± 6.5%, the chip temperature error is less than 4.0%. The presented modeling approach can be the basis for the development of complete MEMS-IC design technology library of thermal wind speed sensor, aiming at optimum designs of integrated thermal wind speed sensor.

Sensitivity of MEMS Microwave Power Sensor with the Length of Thermopile Based on Fourier Equivalent Model

Equivalent method of GaAs PHEMT MMIC for thermal simulation

A New Meshing Criterion for the Equivalent Thermal Analysis of GaAs PHEMT MMICs.

A Thermoelectric MEMS Microwave Power Sensor with Inline Self-Detection Function

Experiments and Comparisons of Power to Failure for SiGe-Based Low-Noise Amplifiers under High-Power Microwave Pulses

Comparative Study of SAW Temperature Sensor Based on Different Piezoelectric Materials and Crystal Cuts for Passive Wireless Measurement

Comparative Modeling of Four-Ended, Modified Four-Ended, and Double-Ended Beam MEMS Thermopile Sensor Structures for Functional Area Optimization

Study on a High Performance MEMS Infrared Thermopile Detector

Research on a Ka-Band MEMS Power Sensor Investigated with an MEMS Cantilever Beam

A Theoretical Study on MEMS-Based Thermal Conductivity Sensor

Comparison of Measurements with Finite-Element Analysis of Silicon-Diaphragm-Based Fiber-Optic Fabry–Perot Temperature Sensors

An efficient macro model for CMOS-MEMS thermal wind speed sensor

Power Sensor Characterization From 110 to 170 GHz Using a Waveguide Calorimeter

Microwave Sensor Loaded With Complementary Curved Ring Resonator for Material Permittivity Detection

CMOS MEMS Thermoelectric Infrared Sensor With Plasmonic Metamaterial Absorber for Selective Wavelength Absorption and Responsivity Enhancement

Performance Enhance of CMOS-MEMS Thermoelectric Infrared Sensor by Using Sensing Material and Structure Design

Comparison Among Coaxial Microcalorimeter Models

Analytical modeling to estimate the sensitivity of MEMS technology-based piezoresistive pressure sensor

Thermal properties analysis of MEMS sensors by micro-grid method

Equivalent Circuit Model of Lumped Elements Retrieved from Measured S-Parameters of Microstrip Line in Frequency Range 0.5-5Ghz

Variation of MEMS Thin Film Device Parameters under the Influence of Thermal Stresses