Abstract:Lumped elements always show a different frequency response from ideal ones when they work at higher frequencies such as microwave band, therefore they have to be modeled by equivalent circuits. To derive the circuit by experiments, we considered the lumped elements as a two-port network which was inserted into a microstrip transmission line for measurements. The network was first modeled as a general PI circuit first, and then finalized by the measured S-parameters. The method was applied to a surface-mounted device (SMD) resistor, a varactor diode, and a phototransistor working at the frequencies of 0.5-5 GHz. The derived circuit models were verified by their simulated S-parameters, which were in a very good agreement with the experiments. Our method provides a simple and effective way to build circuit models for lumped elements, which is helpful for their applications at microwave frequency. Specifically, our circuit model shows how the phototransistor changes its response under different illumination, which provides a way to use it in light-tunable devices.

Equivalent Circuit Model of Lumped Elements Retrieved from Measured S-Parameters of Microstrip Line in Frequency Range 0.5-5Ghz

Improved circuit model for coplanar-waveguide to microstrip-line transition on silicon substrate

Compact Equivalent Circuit Model Of Two-Layer Spiral Inductors

Equivalent method of GaAs PHEMT MMIC for thermal simulation

A Derived Physically Expressive Circuit Model For Integrated Passives In Rfic

An Equivalent Circuit Model with Current Return Path Effects for On-Chip Interconnect Up to 80 Ghz

Wideband lumped element model for on-chip (a)symmetrical coupled interconnects on lossy silicon substrate

Modeling method of finite-difference time-domain based on frequency network models of active devices

Equivalent Circuit Model of On-Wafer Interconnects for Cmos Rfics

RF Equivalent‐circuit Model of Interconnect Bends Based on S‐parameter Measurements

Equivalent circuit modeling of slow wave coplanar strips for millimeter wave applications

A Novel Equivalent Circuit for on Chip Transmission Lines Modeling

Equivalent Circuit Model of Strip Line Up to 110Ghz

A 220-Ghz Compact Equivalent Circuit Model of CMOS Transistors

A Statistical Equivalent Circuit Modelling Based On Measured And De-Embedded S-Parameters

Design Procedure of a Microstrip Filter Facilitated by Lumped-Element Equivalent Circuit Representation

Compact Wideband Equivalent-Circuit Model for Electrical Modeling of Through-Silicon Via

Small-Signal Equivalent Circuit Modeling of a Photodetector Chip

Modeling of Arbitrary Power-Ground Planes with Slot by Using Integral Equation and Transmission Line Method

Accurate Model for Micromachined Microwave Planar Spiral Inductors

Accurate Microwave Circuit Co-Simulation Method Based on Simplified Equivalent Circuit Modeling