Abstract:A horizontal working mode opens the preliminary research on the microgravity adaptability of the uniform metal micro-droplets deposition manufacturing (MDDM) technique in terrestrial environments, in which droplets are ejected horizontally and successively deposited on a vertical solid surface. However, it's an elusive target to avoid forming defects and ensure good geometric appearance because of the difference in droplet deposition when the substrate travels upward and downward (named directional effect). To overcome this problem, in this work, we investigated the off-center overlapping of a new-coming droplet on a previously deposited and solidified droplet on vertical substrate by using both experimental methods and numerical simulation. The evolution mechanism of directional effect is revealed. On this basis, an elimination strategy is further proposed. The results show that the directional effect is a natural phenomenon in droplets horizontal successive deposition. There is a constant deviation in the spreading factor and the overlapping ratio of the new-coming droplet between uphill and downhill deposition directions under different offset ratio conditions. The directional effect is mainly caused by the irregular geometric morphology of the pre-solidified droplet and the direct action of gravity field, which can be effectively eliminated by reasonably differentiating the deposition step distance in the uphill and downhill deposition modes. To guide for the selection of deposition step, a parameter mapping of the contour morphology of deposition trace is further established. This work provides meaningful guidance to improve the forming accuracy in micro-droplets transversal deposition manufacturing on vertical solid surfaces.

A simple model to describe the rule of glancing angle deposition

The Fabrication and Optimization of Nanostructures Using Glancing Angle Deposition

Ballistic Glancing Angle Deposition of Inclined Ag Nanorods Limited by Adatom Diffusion

Glancing angle deposition of Fe triangular nanoprisms consisting of vertically-layered nanoplates

Recent Efforts in Modelling Combined Rate, Size and Thermal Effects on Single Crystal Strength

Modelling of the Nanoscale.

Vertically Lapped Deposition Process of Metal Droplet

Modelling of an obliquely deposited thin film in three dimensions by kinetic Monte Carlo method

Modelling and Experiments Concerning Dendrite Re-Melting and Its Role in Microstructural Evolution in Spray Formed Ni Superalloys

An Integrated Model for Dendritic and Planar Interface Growth and Morphological Transition in Rapid Solidification

Process Optimization of Surface Morphology and Internal Quality Based on Metal Droplets Horizontal Lapped Deposition

Deposition Behavior of Semi-Molten Spray Particles During Flame Spraying of Porous Metal Alloy

Deposition of a Molten Layer of High Melting Point Material: Substrate Melting and Resolidification

Morphology evolution of electrodeposited lithium on metal substrates

Modeling on Molten Pool Transport in Laser Deposition Processes by Lattice Boltzmann Method

Using the Phase Field Method to Investigate Microstructural Evolution of Semi-Solid 357.0 Slurries

On the Role of Surface Diffusion in Determining the Shape or Morphology of Noble-Metal Nanocrystals

Evolution mechanism and elimination strategy for the directional effect in metal droplets horizontal deposition on vertical substrates

Nucleophilic deposition behavior of metal anodes

Modeling the Deposition of Thin Films of Transition Metal Nitrides

Effects of Nanosized Precipitates on the Portevin-Le Chatelier Behavior: Model Prediction and Experimental Verification