Abstract:The mechanical properties of carbon fiber reinforced composites can generally be improved by interfacial design, and one of the possible strategies involves the manipulation of the sizing agent polymer. Although this approach can be industrialized with relative ease compared to grafting functional groups and chemical deposition nano-fillers on the surface of fibers, elucidating its regulatory mechanisms remains a challenge. Herein, molecular simulations are utilized to study the interfacial modification of typical carbon fiber/epoxy composites with different sizing chain length structures, and the physical and chemical characteristics of the interface are firstly quantified. An inhomogeneous distribution of the interfacial phase is further divided into three layers, and each layer is correlated with the evolution of the mechanical properties of the composite. The first layer in the interfacial phase is closest to the fiber surface, which is highly restrained by physical diffusion and exhibits poor mechanical properties. However, the first layer can be considered as an equivalent to a "softener", which is beneficial for conferring better pull-out and bending strength. The second layer has the strongest interaction between the sizing agent and matrix, is controlled by a combination of physical diffusion and chemical interaction, which are particularly significant for interfacial transfer. The interfacial properties of the third layer are controlled by chemical reactions, which are closer to that of the resin matrix. The present study emphasizes the importance of gradient design of mechanical properties between the first and second layers in the hierarchical interface, paving the foundation and direction for a systematic framework of gradient design, optimization, and matching of interfaces in carbon fiber composites.

The Effect of Sizing Agent of Carbon Fibre on the Interface of Electron Beam Cured Composites

Effect of Sizing Agents on Surface Properties of Carbon Fibers and Interfacial Adhesion of Carbon Fiber/Bismaleimide Composites

The Curing Behavior and Properties of Diglycidyl Ether of 4,4′-Bis(4-hydroxybenzoyloxy)-3,3′,5,5′-tetramethylbiphenyl and Its Composites with Multi-Wall Carbon Nanotubes

Size Effect in Curing Optimization for Thick Composite Laminates

Surface Characteristics of Different Cross-Section Carbon Fibers and Its Effect on Interfacial Adhesion Properties of Composite

Effect of Irradiation Grafting Epoxy on Surface Characteristics of Carbon Fibers and Mechanical Properties of Composites

Enhanced Interfacial, Mechanical, and Anti-Hygrothermal Properties of Carbon Fiber/cyanate Ester Composites with the Catalytic Sizing Agents of Titanium Epoxy

Interfacial improvement of carbon fiber reinforced epoxy composites by tuning the content of curing agent in sizing agent

INFLUENCE OF CARBON FIBER IN EPOXY RESIN CURING

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites

Mechanism of the impact of the sizing agent chain length on the interfacial mechanical properties of carbon/epoxy composites

Interfacial Improvement of Carbon Fiber/epoxy Composites Using a Simple Process for Depositing Commercially Functionalized Carbon Nanotubes on the Fibers

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Effect of the double bond content of sizing agents on the mechanical properties of carbon fibre reinforced vinyl ester composites

Effect of carbon nanotube addition in two sizing agents on interfacial properties of carbon fiber / polycarbonate composites

Adjusting the pH of sizing agents to achieve superior interfacial and mechanical properties of carbon fiber reinforced epoxy composites.

Effect of sizing on the interfacial shear strength of carbon fiber/epoxy resin monofilament composite

The influence of sizing treatment on the mechanical and morphological properties of carbon fiber reinforced polyphenylene sulfide composites

Interaction between carbon nanotubes with functional groups and epoxy resin and its effect on thermal properties of carbon nanotubes/epoxy composites

Effect of sizing agents on tensile properties of carbon fiber filament wound structures

Effects of polyetherimide sizing involving carbon nanotubes on interfacial performance of carbon fiber/polyetheretherketone composites