Abstract:An integrated curing simulation methodology considering resin flow and compaction. Computational methods provide effective tools for the prediction of the curing behavior of composites, especially for large‐scale complex composite structures. The flow‐compaction analysis during curing receives insufficient attention in current studies. In this work, an integrated framework considering the heat transfer, the cross‐linking reaction, the flow and compaction, and the stress–strain module is established. A comprehensive resin flow termination criterion is proposed. L‐shaped composites with a stacking layer of [45/90/−45/0]s were fabricated, and the good agreement between the experimentally measured and the numerically predicted contour data validated the current model. Compared with Hubert's model, the prediction accuracy of the thickness and fiber volume content increases by 4.24% and 3.92%, respectively. Correlation analysis between the fiber volume ratio predicted by numerical methods and experimental results (94% for this method, −41% for Hubert's model) demonstrates the well‐capture of nonuniform fiber distribution in curved composites for the current strategy. The overall framework provides an accurate and promising tool for the prediction of the curing behavior of complex composite components. Highlights An integrated numerical methodology is proposed considering the resin flow and compaction. The viscosity‐temperature coupled feature of resin is considered in the permeability coefficients. A comprehensive resin flow termination criterion is proposed for an accurate prediction. The resin content, thickness, and spring‐in angle of L‐shaped laminates are characterized. The good correlation between the experimental and numerical results validates this method. Compared with the model proposed by Hubert, the prediction accuracy improves.

Size Effect in Curing Optimization for Thick Composite Laminates

Optimization Strategy for Curing Ultra-Thick Composite Laminates Based on Multi-Objective Genetic Algorithm

Optimization of Cure Profile for Thick Composite Parts Based on Finite Element Analysis and Genetic Algorithm

An Efficient Thermal Cure Profile Design Method for Autoclave Curing of Large Size Mold

Influence of Large Framed Mold Placement in Autoclave on Heating Performance

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Thickness Variation Effect on Compressive Properties of Ultra-Thick CFRP Laminates

Design Optimization of Molds for Autoclave Process of Composite Manufacturing

Quantitative relations between curing processes and local properties within thick composites based on simulation and machine learning

Optimization of the curing cycle for the large-scale composite stiffened panel based on the response surface methodology and Fgoalattain algorithm

A 3D modeling of the effect of layup orientation on the thickness uniformity of cured composite L-shaped laminates

Coupled filling-curing simulation and optimized design of cure cycle in liquid composite molding

Numerical Simulation of Composite Material Light-Curing Process Based on the Finite Element Analysis Method

Simulation and optimized design of cure cycle for three‐dimensional polymer‐matrix composite component

Numerical Simulation and Multi-objective Optimization for Curing Process of Thermosetting Prepreg

Study on temperature gradient of ultra-thick foam sandwich composite structure during curing

A cooperative relaxation model with two physical parameters for investigating the temperature and cure dependence of relaxation mechanisms in resins

Interfacial improvement of carbon fiber reinforced epoxy composites by tuning the content of curing agent in sizing agent

Viscosity‐coupled curing simulation model for L‐shaped composites considering flow and compaction

The Effect of Sizing Agent of Carbon Fibre on the Interface of Electron Beam Cured Composites