Abstract:In order to improve the interfacial adhesion between carbon fibre and resin matrix in composite materials, it is necessary to treat the surface of the carbon fibre. In this paper, gamma-ray irradiation technique was used to modify polyacrylonitrile based carbon fibre. Laser Raman spectrum and X-ray photoelectron spectroscopy were used to investigate and analyse the structure and chemical composition near the surface of the carbon fibre. The influence of irradiation parameters on the interlaminar shear strength (ILSS) of carbon fibre reinforced epoxy composite materials and the bundle tension strength of carbon fibre was studied. The interfacial adhesion behaviour of composites was characterised using torsional braid analysis. The results show that after irradiation the ILSS of the composite was increased by 20%, while the glass transition peak of the specimen, determined from torsional braid analysis, shifts towards a higher temperature. compared with an unirradiated specimen. The value of the glass transition temperature T-g is increased from 416(.)8 to 424(.)3 K. After irradiation there Was no apparent change in the bundle tensile strength of carbon fibre. Investigations indicate that after irradiation the decrease of microcrystal size, the increase of surface free energy of carbon fibre surface and the active chemical function group formed from unsaturated carbon atoms improve the interface adhesion between the carbon fibre and the matrix in the composites.

Effect of Irradiation Grafting Epoxy on Surface Characteristics of Carbon Fibers and Mechanical Properties of Composites

Effect of Γ-Ray Irradiation Grafting on the Carbon Fibers and Interfacial Adhesion of Epoxy Composites

Effects of Υ-ray Irradiation on Carbon Fiber Surface Graft Modification

Effect of Co60gamma Ray Irradiation for Carbon Fibre on Interfacial Properties in Epoxy Resin Composites

Surface modification of the kidney section carbon fibers by radiation grafting epoxy

Influence of Γ-Ray Radiation Grafting on Interfacial Properties of Aramid Fibers and Epoxy Resin Composites

Effect of Γ-Ray Irradiation Grafting on the Surface Property and the Bulk Structure of M40J Fiber

Effects of carbon fibers modification on the properties of unsaturated polyester self-healing composites

Effect of Γ-Ray Irradiation on the Mechanical Property of Carbon Fiber Reinforced Composite

Effect of Different Graft Polymerization Systems on Surface Modification of Aramid Fibers with Γ-Ray Radiation

Surface and Composite Interface of Carbon Fiber Modified by Grafting of Diethanolamine

The Effect of Carbon Fiber after γ-ray Irradiation on the Mechanical Properties of its Composite

High-energy Radiation Technique Treat on the Surface of Carbon Fiber

Effects of Γ-Ray Radiation Grafting on Aramid Fibers and Its Composites

Study on the Surface Performance of Carbon Fibres Irradiated by Γ-Ray under Different Irradiation Dose

Surface Modification of Aramid Fibers with Γ‐ray Radiation for Improving Interfacial Bonding Strength with Epoxy Resin

Surface modification of PAN-based carbon fiber by electron beam irradiation induced graft

The Effect of Gamma Ray Irradiation on Pan-Based Intermediate Modulus Carbon Fibers

Effect of Surface Treatment of Carbon Fibers with Gamma-Ray Radiation on Mechanical Performance of Their Composites

The Effect on Carbon Fiber Surface Structure and Tensile Strength Irradiated by Γ-Ray

Surface grafting modification of carbon fibers by γ-ray pre-irradiation and plasma technique