Abstract:In view of the influence of shear effect on bar deflection in low-stress cropping, which makes it difficult to control the loading die and seriously affects the surface quality of cropping bar, based on the energy balance theory in this paper, the stiffness equivalent transformation of the bar with annular V-shaped notch and dynamic crack is carried out, and the coupling effect of bending moment and shear force on the bar deflection before and after crack initiation is quantified. Based on it, the deflection characterization formula for the whole cropping process of the bar with different length-diameter ( L/ 2 R ) ratios is established. The change laws of bar deflection with different L/ 2 R ratios are analyzed by XFEM method. Especially for the bar with L/ 2 R ≤ 2.84, it is pointed out that it is necessary to consider the influence of shear deflection on the basis of bending deflection, and its influence degree decreases with the increase of L/ 2 R . The real-time synchronous dynamic deflection test platform is built on the cropping machine of rotary bending. The research shows that the calculated values obtained by the deflection characterization formula proposed are in good agreement with the corresponding experimental results. The evaluation parameter, maximum contact stress reduction ratio ξ ( p-l )/ p , is proposed to characterize the degree of surface contact stress reduction under line contact loading relative to point contact loading. It is pointed out that the variation range of ξ ( p-l )/ p of the bar with different L/ 2 R ratios under the influence of deflection is as high as 49.8%-64.1%. And further application of double bearings outer ring loading is also beneficial to obtain high cropping quality.

The Ideal Control Curves of Low Stress Precision Cropping Experimental Study on Metal Bar

Experimental investigation of the effect of the circumferential loading of a rotary striking action cropping system

Experimental Study on New Precision Cropping Process for Metal Bars

Experimental investigation on new low cycle fatigue precision cropping process

Research on a new type of precision cropping method with variable frequency vibration

Experiment Study on Novel Precision Cropping Machinery Using Rotary Striking Action

New Controllable and Near Net Bar Fine-Cropping System

Theoretical and Experimental Investigation on Influence of Load Control Strategy of LY12 Duralumin Alloy Bar Fine Cropping Process

A Novel Type Of Precision Cropping Machinery Using Rotary Striking Action

A New Approach to Precision Cropping with Radial Forging

Research on the deflection of metal bar with V-shaped notch in low-stress cropping process

Experimental Study on New Low Cycle Fatigue Precision Cropping Process

Research on Radial Motion Characteristic of the Cropping Hammer in Radial-Forging Cropping Method

Research on bar deflection of low-stress cropping process under bending-shear coupling effect

Investigation on a New Type of Low-Stress Cropping System with Variable Frequency Vibration

A multiple rolling-point loading method for low-stress equal-radial-depth cropping

Research on Hydraulic Compensation and Variable Loading Arm for a New-Type Low-Stress Cropping System

Research on Variable Frequency-Loading Curve in Precision Cropping System with High-Speed and Centrifugal Action

Numerical and Experimental Investigation on the Influence of Main Motor Rotational Frequency in Fine-Cropping

Study on the Pre-Shearing Cropping Process of Steel Bars

Investigation on the Bar Clamping Position of a New Type of Precision Cropping System with Variable Frequency Vibration