Abstract:The three-dimensional grain-averaged response of solid bar samples under non-proportional (NP) elastoplastic axial-torsional loading was investigated using in situ high energy diffraction microscopy (HEDM) and companion crystal plasticity finite element (CPFE) modeling. Important stress metrics including applied shear (σ θZ ) and axial (σ ZZ ) stress tensor components, stress and stress deviator tensor invariants (I 1 , J 2 , and J 3 ), von Mises equivalent stress (), maximum resolved shear stress (mRSS), stress triaxiality (η), and lode angle parameter () values were tracked for ∼ 300 grains under two different loading conditions: (1) Torsion-dominated loading (low NP) and (2) Tension-torsion loading (high NP) in equiatomic NiCoCr, a representative multicomponent face-centered cubic (FCC) superalloy. Overall, significant stress localizations existed within both samples as evidenced by the radial dependence of grain-resolved σ θZ , , and J 2 ; by comparison, I 1 , J 3 , η, and metrics did not show discernable trends within the volume. These stress localizations reveal a complex interplay between axial and shear stress components (e.g., stress coupling) resulting in grain yielding near the sample surface largely driven by shear stress, whereas internal grain yielding was largely accommodated by axial stress. Grain-resolved stress localization trends were described well by the CPFE model, although some discrepancies in magnitude occurred, particularly for volumetric stress metrics (I 1 and η) due to initial type II residual stress distributions. The superposition of initial residual stress states onto CPFE grain-resolved data significantly improved model accuracy for η. This suggests that residual stresses more strongly influence the simulation of volumetric rather than deviatoric (yield) stress metrics.

A multiple rolling-point loading method for low-stress equal-radial-depth cropping

Research on bar deflection of low-stress cropping process under bending-shear coupling effect

Research on the deflection of metal bar with V-shaped notch in low-stress cropping process

Effect of symmetrical position notching on cracking and cross-section quality of thick-walled metal tube under low-stress cropping

Influence of contact parameters on the wear characteristics of fixture-bar friction pair in low-stress cropping

3-D Dynamic Elastic–plastic FEA for Rotating Disk Indirect Bar–bar Tensile Impact Apparatus: Numerical Analysis for the Generation of Mechanically-Filtered Incident Stress Pulses

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Analytical prediction of the fatigue limit for axisymmetric round bars with rough surface morphology

FDEM investigation on the crack propagation characteristics of walnut shell under multi-contact loadings

A fast approach for predicting stress intensity factors in tortuous cracks under mixed-mode loading

Modeling of Crack Propagation with the Quasi-Static Material Point Method

In situ measurement of three-dimensional intergranular stress localizations and grain yielding under elastoplastic axial-torsional loading

Experimental and numerical insights into fatigue crack propagation of railway component with gradient residual stress

A NOVEL AUGMENTED FINITE ELEMENT METHOD FOR NONLINEAR FRACTURE IN ELASTOPLASTIC BARS

Study on near-net forming technology for bars by axial feed skew rolling based on taper-end billets

Fatigue crack growth in wheel-rail rolling-sliding contact: A perspective of elastic-plastic fracture mechanics criterion

In-situ observation of strain evolution and ratchetting of growing fatigue cracks

Research of optimization for crack propagation method

Prediction of crack shape in a cylindrical bar under combined fatigue tension and torsion loading

Proposal and application of a new yield criterion for metal plastic deformation