Abstract:The Material Point Method (MPM), which is a FEM-based particle method, has recently been applied to the simulation of fracture mechanics. In this paper, a new algorithm for modelling cracks in the MPM framework, named the eXtended Material Point Method (XMPM), is proposed. The XMPM enriches the nodal degrees of freedom in the region around the crack and the jump function is chosen as the enrichment function to describe the crack. This improvement allows the crack problem, whose displacement and velocity are discontinuous, to be simulated by only one set of background grid mesh, and so multigrid or multiple velocity fields are not necessary. Then the discretization scheme of the XMPM is derived based on the weak form of the momentum conservation equations, just as the conventional MPM. The technique we lump the mass matrix makes the XMPM can be implemented easily in a conventional MPM code and can degenerate to the conventional MPM when there is no crack. The Level Set Method (LSM) is also employed in the XMPM for easily tracking crack surfaces. The crack moves with the material points physically, so that the LSM function is carried by particles. In each time step, the LSM function value is mapped to the grid nodes from the particles, and the nodes to be enriched can be identified conveniently from the grid nodal LSM function values. Based on the LSM tracking crack surface and accurate calculation of fracture parameters, crack propagation could be implemented in the XMPM framework. The LSM values of particles around the crack tip should be recalculated as the crack propagates, which does not bring additional computational cost except in the region of the crack tip. Numerical examples show that the XMPM is accurate to the level of ABAQUS XFEM for the symmetric horizontal crack problem. For both the static and dynamic problems, the results agree well with the analytical solution, experiments and other numerical methods, which illustrate the good performance of the XMPM.

Modeling of Crack Propagation with the Quasi-Static Material Point Method

Extended Material Point Method for the 3D Crack Problems

Modeling Crack Propagation in Heterogeneous Granite Using Grain-Based Phase Field Method

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

A configurational force-based material point method for crack propagation modelling in 2D

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Extended material point method for the three‐dimensional crack problems

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Numerical Modeling of Pumping-Induced Earth Fissures Using Coupled Quasi-Static Material Point Method

An Enriched Constitutive Model for Fracture Propagation Analysis using the Material Point Method

MODELLING OF CRACK PROPAGATION FOR COMPOSITE MATERIALS BASED ON POLYGON SCALED BOUNDARY FINITE ELEMENTS

Material Point Method with Enriched Shape Function for Crack Problems

Quasi-Static Crack Propagation Modeling Using Shape-Free Hybrid Stress-Function Elements With Drilling Degrees Of Freedom

An adaptive peridynamics material point method for dynamic fracture problem

A Mesh Objective Continuum Damage Model for Quasi-Brittle Crack Modelling and Finite Element Implementation

Crack-closure behavior and stress-sensitive wave velocity of hard rock based on flat-joint model in particle-flow-code (PFC) modeling

A new nonlocal macro-meso-scale consistent damage model for crack modeling of quasi-brittle materials

Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

Study on the fracture behavior in clayey geomaterials under moisture diffusion by phase field modeling

An explicit improved meshless numerical manifold method for dynamic crack propagation