Buckling Performance of Polymer Insulator V-type Strings for 500 kV Compact Transmission Line Under Gale Circumstance
Liming WANG,Ting HUANG,Lu CAO,Kaiwei FU,Fuzeng ZHANG,Zilan HE
DOI: https://doi.org/10.13336/j.1003-6520.hve.20190329017
2019-01-01
Abstract:As a key component in compact transmission line, V-type string plays a role of hanging conductor and controlling safe distance. V-type string will swing with the wind and suffer large buckling deformation under strong wind.Thus, it is particularly important to study its mechanical properties under gale circumstance. We studied the V-string for a500 kV compact transmission line of Yunnan. Firstly, using the method of static equilibrium, we calculated the maximum buckling stress of insulator under steady wind and pulsating wind. Then the dynamic buckling response of the V-type insulators was obtained by simulating the wind swinging response of compact transmission line under pulsating wind and impulse wind load after using the three-degree-of-freedom nonlinear mechanical software developed by Tsinghua University. The extreme buckling stress of the V-type insulator under the action of steady wind, pulsating wind and impulse wind was respectively compared, and amplification factors under the latter two wind loads were obtained as 1.2 and 1.6～2.6.Moreover, in consideration of the effect of impulse wind, the buckling response of insulator was obtained when insulators of different V-angle and different diameters were adopted. The results show that it is safe to use V-type strings with angle of 100° and insulators with 24-mm diameter. Moreover, we put forward a design scheme of 24 mm-diameter rod double V-type string for anti-buckling-fracture. Finally, the software ANSYS is used to discuss the influence of the connection degree of freedom of the connection of the high voltage end on the buckling stress distribution of the insulator, and the stress value amplification factor of 1.0～1.3 is obtained.