Shearing-wrinkling behavior of creased rectangular membrane

Changguo Wang,ZhenYong Du,H. F. Tan,Jun Xie

2011-01-01

Abstract:null

What problem does this paper attempt to address?

Spatially Configuring Wrinkle Pattern and Multiscale Surface Evolution with Structural Confinement

Ding Wang,Nontawit Cheewaruangroj,Yifan Li,Glen McHale,Yinzhu Jiang,David Wood,John Simeon Biggins,Ben Bin Xu

DOI: https://doi.org/10.1002/adfm.201704228

IF: 19

2017-01-01

Advanced Functional Materials

Abstract:Surface elastic instabilities, such as wrinkling and creasing, can enable a convenient strategy to impart reversible patterned topography to a surface. Here the classic system of a stiff layer on a soft substrate is focused, which famously produces parallel harmonic wrinkles at modest uniaxial compression that period‐double repeatedly at higher compressions and ultimately evolve into deep folds and creases. By introducing micrometer‐scale planar Bravais lattice holes to spatially pattern the substrate, these instabilities are guided into a wide variety of different patterns, including wrinkling in parallel bands and star shape bands, and radically reduce the threshold compression. The experimental patterns and thresholds are enabled to understand by considering a simple plane‐strain model for the patterned substrate‐deformation, decorated by wrinkling on the stiff surface layer. The experiments also show localized wrinkle‐crease transitions at modest compression, yielding a hierarchical surface with different generations of instability mixed together. By varying the geometrical inputs, control over the stepwise evolution of surface morphologies is demonstrated. These results demonstrate considerable control over both the patterns and threshold of the surface elastic instabilities, and have relevance to many emerging applications of morphing surfaces, including in wearable/flexible electronics, biomedical systems, and optical devices.
Wrinkling and Smoothing of a Soft Shell

Ting Wang,Yifan Yang,Chenbo Fu,Fei Liu,Kui Wang,Fan Xu

DOI: https://doi.org/10.1016/j.jmps.2019.103738

IF: 5.582

2019-01-01

Journal of the Mechanics and Physics of Solids

Abstract:Transverse wrinkles usually occur in a uniaxially tensile elastic membrane and will be smoothed upon excess stretching. This instability-restabilization response (isola-center bifurcation) can originate from the nonlinear competition between stretching energy and bending energy. Here, we find a crucial factor, the curvature, which can control effectively and precisely the wrinkling and smoothing regimes. When the sheet is bent, the regime of wrinkling amplitude versus membrane elongation is narrowed, with local wrinkling instability coupled with global bending. There exists a critical curvature, where no wrinkles appear when the value is beyond this threshold. The curvature effects on wrinkling-smoothing behavior have been quantitatively explored by our theories, computations and experiments. The models developed in this work can describe large in-plane strains of soft shells to effectively capture this transition behavior, which build on general differential geometry and thus can be extended to arbitrarily curved surfaces. Our findings may shed light on designs of wrinkle-tunable membrane surfaces and structures. (C) 2019 Elsevier Ltd. All rights reserved.
Surface effects on the wrinkles in a stiff thin film bonded to a compliant substrate

Yuhang Li,Bo Fang,Jiazhong Zhang,Jizhou Song

DOI: https://doi.org/10.1016/j.tsf.2011.11.085

IF: 2.1

2012-01-01

Thin Solid Films

Abstract:Surface effects are important to predict the mechanical behavior of nanostructures. In this paper, the wrinkling of a stiff thin film bonded to a compliant substrate is studied using an energy method accounting for surface elasticity and residual surface tension. The wavelength, critical buckling strain and amplitude are obtained analytically. These results provide valuable guide to the precise design and control of the wrinkling profile in many applications ranging from stretchable electronics to micro/nano scale surface patterning and precision metrology.
Damage and Failure Mechanisms of CFRP Due to Manufacturing Induced Wrinkling Defects

Lixiao Chen,Lei Miao,Qiang Xu,Qiangxin Yang,Weidong Zhu,Yinglin Ke

DOI: https://doi.org/10.1016/j.compstruct.2023.117624

IF: 6.3

2023-01-01

Composite Structures

Abstract:Out-of-plane wrinkling is a typical defect in the manufacturing process of carbon fiber reinforced plastics (CFRP). The cross-ply composite laminates containing various wrinkles were designed and prepared based on a hybrid generation method of gaps and transverse strips. An analytical model based on the sine function was proposed to characterize the shape of wrinkles, and the severity of the defect was characterized by the wrinkle angle. With the aim to investigate the compression and out-of-plane shear failure performance of CFRP with wrinkles, experimental and numerical studies were conducted. Results show that the existence of wrinkled zone can significantly reduce the compressive strength of laminates and exacerbate delamination during compression failure, a maximum of 26.9% and 2.8% drop in the compressive and interlaminar shear strength was reported in the most severe experimental conditions. Meanwhile, it is indicated that wrinkles have little effect on interlaminar shear strength, but it can change the location and severity of the delamination failure. In addition, the failure mechanism of several models with different levels of wrinkling defects was studied through numerical analysis techniques. It is confirmed that the numerical model can effectively predict the failure intensity and failure modes. These findings are of great significance for the accurate evaluation of the mechanical properties of composites containing wrinkling defects.
A separation-of-variable method for the wrinkling problems of orthotropic rectangular stretched sheets

Ye Yuan,Yufeng Xing,Ye Yuan,Yufeng Xing

DOI: https://doi.org/10.1016/j.compstruct.2022.116104

IF: 6.3

2022-11-15

Composite Structures

Abstract:Film structures have been extensively employed in space and soft materials. The flexural rigidity of a sheet is so small that it can hardly withstand pressure, causing instability and forming wrinkles. This work develops a separation-of-variable (SOV) method to the stretched-induced wrinkling analysis of orthotropic rectangular sheets. In this SOV method, wrinkling mode functions are in a separation-of-variable form, and two ordinary characteristic differential equations of wrinkling mode functions are derived through the minimum principle of the potential energy, then the mode functions are expressed in terms of the eigenvalues of the characteristic differential equations. Finally, closed-form mode functions and explicit equations for critical tensile strains are achieved with the boundary conditions of rectangular sheets. In this work, both stretched edges are clamped or simply supported, and another pair of edges are free, and the closed form solutions for the rectangular sheets with clamped stretched edges are achieved for the first time. The present results agree well with the analytical and numerical results in literature. In addition, the stretching process is described and several observations are found through theoretical and numerical analyses.

mechanics,materials science, composites
Wrinkling analysis of circular membranes by a Fourier based reduced model

Wei Huang,Wei Yan,Rui Xu,Qun Huang,Jie Yang,François Trochu,Heng Hu

DOI: https://doi.org/10.1016/j.tws.2021.107512

2021-04-01

Abstract:<p>As a material with an almost negligible bending stiffness, membranes may easily lose their mechanical stability. Generally, the wave lengths of the wrinkles are quite small, leading to the intensive computation in numerical simulations. To deal with the issue, a Fourier based reduced model is recently developed by Huang et al. (2019) showing good performance in both accuracy and efficiency for the simulation of circular membrane wrinkling. The objective of this paper is to improve the reduced model by accounting for several Fourier harmonics, then employ it to study the wrinkling phenomenon in the circular domain. By accounting for several Fourier harmonics, the reduced model can automatically distinguish the lowest instability pattern, which facilitates the study of the cases of unknown wrinkling patterns. The instability mechanism of an annular membrane under in-plane stretching is also investigated. The results show that the appearance of the wrinkles in circular membranes does not rely on the Poisson's effect, although the value of Poisson's ratio and the geometric dimensions have great influence on the wrinkling patterns. Finally, the instability problem of a circular thin plate under the in-plane compression is studied. The effects of the boundary condition and the wrinkling pattern on the crest position and the critical load are investigated.</p>

engineering, mechanical,mechanics, civil
Surface Wrinkling of an Elastic Graded Layer.

Zhou Chen,Xiaofei Zhang,Jizhou Song

DOI: https://doi.org/10.1039/c8sm01654b

IF: 4.046

2018-01-01

Soft Matter

Abstract:Surface instabilities have been extensively studied for homogeneous materials or film/substrate systems but with less studies on elastic graded materials. This paper studies surface wrinkling of an elastic graded layer theoretically, numerically and experimentally. A theoretical model for the onset of surface wrinkling with a sinusoidal mode is established. The predicted critical wrinkling strain and wavelength agree well with finite element analysis (FEA) for the elastic graded layer with exponentially decaying modulus. The influence of the layer thickness as well as the material properties on the critical conditions for the onset of surface wrinkling is fully investigated. The morphology evolution of surface wrinkling from FEA indicates the transitions of the sinusoidal mode to the arch mode and then to the period-doubling mode with a co-existing crease mode and folding mode, which agree well quantitatively with experimental observations. These results are helpful to provide physical insights into the influence of material inhomogeneity on surface instabilities.
Wrinkling of Thin Films on a Microstructured Substrate

Xiao Huang,Yu Hai,Bo Li,Xi-Qiao Feng

DOI: https://doi.org/10.1080/15376494.2017.1323138

2017-01-01

Mechanics of Advanced Materials and Structures

Abstract:ABSTRACT Surface wrinkling of thin films on substrates offers an effective strategy to create controllable surface patterns of wide application. In this article, both theoretical analysis and numerical simulations are performed to study the surface wrinkling of thin films bonded on a microstructured soft substrate under compression. We consider two typical kinds of substrates that have different mechanical properties. One possesses a periodic array of micropillars, and the other has a period of alternating unbonded—bonded regions at the film—substrate interface. The characteristics of surface wrinkling and postbuckling evolution of films are revealed. It is found that the interfacial microstructures modulate the normal mechanical properties of the substrate and, thus, tailor the buckling behavior of the thin film atop it. Under lateral compression, the film on the substrate shows periodic arrays of micropillars exhibiting sinusoidal wrinkling first, and then with further compression, the wrinkles give way to a deep fold accompanied by Euler buckling of the micropillars and the decay of neighboring wrinkles. For the system with periodic unbonded—bonded regions at the film—substrate interface, wrinkling of the film is characterized by a relative shift in the normal direction. This study offers potential applications in the fabrication of tunable surface morphologies.
Numerical and Experimental Investigation of Wrinkling Pattern for Aerospace Laminated Membrane Structures

Yihong Hong,Wenjuan Yao,Yan Xu

DOI: https://doi.org/10.1155/2017/8476041

IF: 1.4

2017-01-01

International Journal of Aerospace Engineering

Abstract:Al-polymer laminated membranes are widely used in large aerospace structures. When the laminated membranes are pressurized, wrinkles emerge, which have an important effect on the performance of the structures during operation. This paper describes the numerical simulation and experimental investigation of wrinkles in laminated membranes. The nonlinear postbuckling analysis method, based on laminated thin-shell elements, was used to simulate the onset, growth, and final configuration of wrinkles when laminated membranes are subjected to external loads. The simulations are conducted with the ANSYS finite element package. Changing regularities of number, wavelength, and range for the wrinkles during the onset and growth processes are investigated. The wrinkles of laminated membranes with different design parameters such as material selection, ply number, ply angle, and ply mode are predicted. Devices that can be used to clamp and load laminated membranes in several load cases were designed and developed. A 3D photogrammetry system was constructed to characterize wrinkling patterns of laminated membranes subjected to shear displacement loads. By comparing the results of numerical analysis and experimental results, the accuracy of the numerical analysis method was verified. This study work is expected to inform wrinkling simulation and shape control of aerospace laminated membrane structures.
Macroscopic Simulation of Membrane Wrinkling for Various Loading Cases

Qun Huang,Heng Hu,Kun Yu,Michel Potier-Ferry,Salim Belouettar,Noureddine Damil

DOI: https://doi.org/10.1016/j.ijsolstr.2015.04.003

IF: 3.667

2015-01-01

International Journal of Solids and Structures

Abstract:The paper discusses membrane instability phenomena by a Fourier-related double scale approach that was introduced recently. This leads to a reduced-order model that is able to capture the main features of the wrinkles with few degrees of freedom. The paper focuses on the corresponding finite element procedure, its implementation and evaluation and applications to various cases of loading and boundary condition. The finite element model has first been implemented in a home-made code, the nonlinear system being solved by the Asymptotic Numerical Method (ANM), which has advantages of efficiency and reliability for stability analyses. It has also been implemented as a user element in a commercial software to evaluate the effectiveness of the reduction technique. Various loading cases were considered and the numerical tests establish that the reduced model can predict the wrinkling patterns, even when there are few wrinkles. The numerical results highlight the strong influence of a dimensionless parameter for wrinkling initiation. (C) 2015 Elsevier Ltd. All rights reserved.
Numerical Study of the Onset and Prevention of Wrinkles with Dielectric Elastomer Membrane

Yi-chen ZHANG,Shao-xing QU

DOI: https://doi.org/10.3969/j.issn.1005-2895.2011.01.022

2011-01-01

Abstract:Wrinkles,as one common phenomenon occurred together with soft matter membrane such as dielectric elastomer(DE),and structure service process is one of the most important factors that affects the normal application of DE apparatus.It is well known that the originality of wrinkle is eigenvalue buckling of membrane.This paper proceed numerical study on the onset and prevention of wrinkles of DE membrane,established finite-element model of DE membrane calculated deformation of DE membrane given displacement load,as well as calculated deformation and stress of membrane under certain amount of pretension.Finally,after comparing results of different work condition,the critical pretension needed to eliminate wrinkles under different load is found,and thus a new method to prevent wrinkles is developed.
Curvature Induced Hierarchical Wrinkling Patterns in Soft Bilayers

Zhi-Chun Shao,Yan Zhao,Wanyu Zhang,Yanping Cao,Xi-Qiao Feng

DOI: https://doi.org/10.1039/c6sm01088a

IF: 4.046

2016-01-01

Soft Matter

Abstract:Sinusoidal wrinkling will occur in a planar film-substrate bilayer when the uniaxial compressive strain imposed to the system exceeds a critical value. However, when a core-shell soft cylinder is subjected to axial compression, surface wrinkling patterns may evolve from the sinusoidal mode to the diamond-like mode, depending on the modular ratio and the curvature of the system. Inspired by this phenomenon, we here propose a simple yet robust strategy to fabricate hierarchical wrinkling patterns by controlling the curvature of a film-substrate system. To quantitatively understand the experimental results, a three-dimensional finite element model has been built to track the wrinkling pattern evolution. Furthermore, a phase diagram is provided based on the theoretical analysis and finite element simulations, which may guide the experimental design. In addition, the wetting properties of the surface with hierarchical micropatterns fabricated using the proposed method are investigated. The results show that the hierarchical surface wrinkles lead to anisotropic wetting behavior, which can be tuned by controlling the imposed compressive strain. The tunable anisotropic wetting surface fabricated here may find a broad range of applications such as in the development of sensors, fluidic devices, micro-reactors and biomedical devices.
The boundary effects on stretch-induced membrane wrinkling

Qun Huang,Jie Yang,Wei Huang,Gaetano Giunta,Salim Belouettar,Heng Hu

DOI: https://doi.org/10.1016/j.tws.2020.106838

2020-09-01

Abstract:<p>This paper aims to study the boundary effects on stretch-induced membrane wrinkling. Towards this end, several typical distributions of tensile loads, that are applied at the short ends of rectangular membranes, are investigated, which produce a system of forces statically equivalent to force and moment. In addition, we explore the relevance of a dimensionless parameter to the buckling loads for these loading cases. By analyzing the critical buckling loads, it is found that small differences in loading conditions lead to critical loads that can differ up to three orders of magnitudes. Besides, the dimensionless parameter is almost constant near bifurcation points independently from boundary conditions. Based on this property, a simple expression is proposed to fast predict the critical load of membrane wrinkling. This paper may provide a simple way to delay or avoid the occurrence of wrinkles by just changing the boundary conditions.</p>

engineering, mechanical,mechanics, civil
Curvature Tunes Wrinkling in Shells

Ting Wang,Fei Liu,Chenbo Fu,Xiaoliang Zhang,Kui Wang,Fan Xu

DOI: https://doi.org/10.1016/j.ijengsci.2021.103490

IF: 7.155

2021-01-01

International Journal of Engineering Science

Abstract:Transverse wrinkles usually emerge in a uniaxially stretched elastic film and can be suppressed upon further tension, which is an instability-restabilization behavior due to the nonlinear competition between stretching energy and bending energy. Here, we show that curvature can effectively and precisely tune the wrinkling localization and amplitude. To quantitatively explore curvature effect on the wrinkling response, we develop a finite strain shell model with varying curvatures, e.g., S-shaped and C-shaped surfaces, based on the general differential geometry and nonlinear elasticity theory. Distinguished from the central wrinkling observed in a stretched cylindrical film with constant curvature, we reveal that wrinkles tend to move toward the region with lower curvature. Notably, localized wrinkles can be remotely influenced by the curvature of neighbouring region. Understanding morphological pattern evolution and in particular the dependence of wrinkling behavior on curvature, e.g., 3D phase diagram of stability boundaries, is crucial for the effective use of wrinkling as a tool for realizing multifunctional wrinkle-tunable surfaces. (C) 2021 Elsevier Ltd. All rights reserved.
Effects of Tension–compression Asymmetry on the Surface Wrinkling of Film–substrate Systems

Xiao Huang,Bo Li,Wei Hong,Yan-Ping Cao,Xi-Qiao Feng

DOI: https://doi.org/10.1016/j.jmps.2016.04.014

IF: 5.582

2016-01-01

Journal of the Mechanics and Physics of Solids

Abstract:Many soft materials and biological tissues are featured with the tension–compression asymmetry of constitutive relations. The surface wrinkling of a stiff thin film lying on a compliant substrate is investigated through theoretical analysis and numerical simulations. It is found that the tension–compression asymmetry of the soft substrate not only affects the critical strain of buckling but, more importantly, may also influence the wrinkling pattern that occurs in the film–substrate system under specified loading conditions. Due to this mechanism, the thin film subjected to equi-biaxial compression may first buckle into a hexagonal array of dimples or bulges, instead of the checkerboard pattern, and consequently evolve into labyrinths with further loading. Under non-equi-biaxial compression, the system may buckle either into a parallel bead-chain pattern or a stripe pattern, depending on the substrate nonlinearity and the loading biaxiality. Phase diagrams are established for the wrinkling patterns in a wide range of geometric and mechanical parameters, which facilitate the design of surface patterns with desired properties and functions.
Orientable Wrinkles in Stretched Orthotropic Films

Fei Liu,Fan Xu,Chenbo Fu

DOI: https://doi.org/10.1016/j.eml.2019.100579

IF: 4.728

2019-01-01

Extreme Mechanics Letters

Abstract:Tensional wrinkles are widely observed in elastic thin films, with mono-orientation of wrinkles being usually perpendicular to the stretching direction. Here, by changing material orthotropic direction, we present orientable wrinkles in uniaxially stretched orthotropic membranes. To quantitatively explore orthotropy-related wrinkles and their morphological evolution, we develop a mathematical model by introducing orthotropic, elastic constitution into the extended Föppl–von Kármán nonlinear plate theory that can describe large in-plane anisotropic deformations. We find that degree of orthotropy and shear modulus significantly affect the critical buckling strain, restabilization point and wrinkling amplitude. A 3D phase diagram on stability boundaries is drawn and we find that no wrinkles emerge when the orthotropic parameters are located in the stability region. Orientable oblique wrinkles, depending on the angle between orthotropy and stretching direction, are carefully examined, which could be used to guide effective designs of wrinkle-tunable membrane surfaces and structures.
Wrinkling of a stiff thin film bonded to a pre-strained, compliant substrate with finite thickness

Yinji Ma,Yeguang Xue,Kyung-In Jang,Xue Feng,John A. Rogers,Yonggang Huang

DOI: https://doi.org/10.1098/rspa.2016.0339

2016-08-01

Abstract:A stiff thin film bonded to a pre-strained, compliant substrate wrinkles into a sinusoidal form upon release of the pre-strain. Many analytical models developed for the critical pre-strain for wrinkling assume that the substrate is semi-infinite. This critical pre-strain is actually much smaller than that for a substrate with finite thickness (Ma Y et al. 2016 Adv. Funct. Mater. ( doi:10.1002/adfm.201600713 )). An analytical solution of the critical pre-strain for a system of a stiff film bonded to a pre-strained, finite-thickness, compliant substrate is obtained, and it agrees well with the finite-element analysis. The finite-thickness effect is significant when the substrate tensile stiffness cannot overwhelm the film tensile stiffness.
A Finite Strain Model Predicts Oblique Wrinkles in Stretched Anisotropic Films

Yifan Yang,Chenbo Fu,Fan Xu

DOI: https://doi.org/10.1016/j.ijengsci.2020.103354

IF: 7.155

2020-01-01

International Journal of Engineering Science

Abstract:Transverse wrinkles commonly occur in a uniaxially tensile elastic membrane and can vanish upon excess stretching. The wrinkling direction is usually perpendicular to the stretching direction under isotropic elasticity. Here, we show that wrinkles are orientable by material anisotropy, such as in fiber-reinforced or fibrous films, and the wrinkling orientation can be tuned by varying the stiffness and direction of fibers. To quantitatively describe large anisotropic deformations and predict morphological evolution, we develop a finite strain model by introducing anisotropic, hyperelastic constitutive law into the geometrically extended Föppl-von Kármán nonlinear plate theory. We find that the shear modulus ratio between fibers and matrix significantly affects the critical buckling threshold, restabilization point and wrinkling amplitude. The shear modulus ratio above a critical value prevents the appearance of wrinkles. Effects of the angle between fibers and stretching direction on the oblique wrinkling orientation are carefully examined. The findings could provide an effective way to design wrinkle-tunable surfaces for fiber-reinforced or biomimetic membranes.
Stability boundaries for wrinkling in highly stretched elastic sheets

Qingdu Li,Timothy J. Healey

DOI: https://doi.org/10.1016/j.jmps.2015.12.001

IF: 5.582

2016-12-01

Journal of the Mechanics and Physics of Solids

Abstract:We determine stability boundaries for the wrinkling of highly unidirectionally stretched, finely thin, rectangular elastic sheets. For a given fine thickness and length, a stability boundary here is a curve in the parameter plane, aspect ratio vs. the macroscopic strain; the values on one side of the boundary are associated with stable unwrinkled (flat) states, while stable wrinkled configurations correspond to all values on the other. In our recent work we demonstrated the importance of finite elasticity in the membrane part of such a model in order to capture the correct phenomena. Here we present and compare results for four distinct models: (i) the popular Föppl–von Kármán plate model (FvK), (ii) a correction of the latter, used in our earlier work, in which the approximate 2D Föppl strain tensor is replaced by the exact Green strain tensor, (iii) and (iv): effective 2D finite-elasticity membrane models based on 3D incompressible neo-Hookean and Mooney–Rivlin materials, respectively. In particular, (iii) and (iv) are superior models for elastomers. The 2D nonlinear, hyperelastic models (ii)–(iv) all incorporate the same quadratic bending energy used in FvK. Our results illuminate serious shortcomings of the latter in this problem, while also pointing to inaccuracies of model (ii) – in spite of yielding the correct qualitative phenomena in our earlier work. In each of these, the shortcoming is a due to a deficiency of the membrane part of the model.

mechanics,materials science, multidisciplinary,physics, condensed matter
Wrinkle-free membranes through spatioselective exposure

Guangliang Qi,Heng Gao,Jianyue Wang,Guozhong Zhao,Dzianis Marmysh,Zhan Kang,Kexi Zhu,Ming Li

DOI: https://doi.org/10.1016/j.jmps.2024.105752

IF: 5.582

2024-06-26

Journal of the Mechanics and Physics of Solids

Abstract:The extreme flexibility-induced wrinkling significantly hampers the promising engineering applications of membranes, while the existing wrinkling-suppression approaches have challenges for area loss, weight increase and interfacial delamination. Here we propose a facile wrinkle-free technique that enables stiffness modulation through spatioselective ultraviolet (UV) exposure, regulates stress distribution to eliminate compressive stresses and achieves robust wrinkle-free membranes. A small-deformation theoretical model with the Marguerre function is implemented to evaluate the wrinkling capability of a stiffness-modulated membrane, the non-gradient particle swarm optimization (PSO) algorithm is performed to obtain the optimal material distribution, and the related robust wrinkle-free performance is verified through both finite-deformation post-buckling analyses and physical experiments. In addition, an empirical wrinkle-free solution is also given without the requirement of excessive optimization. This wrinkle-free approach, with neither area loss, weight increase nor interfacial delamination, provides useful guidance for the research on wrinkle-free membranes.

mechanics,materials science, multidisciplinary,physics, condensed matter

Shearing-wrinkling behavior of creased rectangular membrane

Spatially Configuring Wrinkle Pattern and Multiscale Surface Evolution with Structural Confinement

Wrinkling and Smoothing of a Soft Shell

Surface effects on the wrinkles in a stiff thin film bonded to a compliant substrate

Damage and Failure Mechanisms of CFRP Due to Manufacturing Induced Wrinkling Defects

A separation-of-variable method for the wrinkling problems of orthotropic rectangular stretched sheets

Wrinkling analysis of circular membranes by a Fourier based reduced model

Surface Wrinkling of an Elastic Graded Layer.

Wrinkling of Thin Films on a Microstructured Substrate

Numerical and Experimental Investigation of Wrinkling Pattern for Aerospace Laminated Membrane Structures

Macroscopic Simulation of Membrane Wrinkling for Various Loading Cases

Numerical Study of the Onset and Prevention of Wrinkles with Dielectric Elastomer Membrane

Curvature Induced Hierarchical Wrinkling Patterns in Soft Bilayers

The boundary effects on stretch-induced membrane wrinkling

Curvature Tunes Wrinkling in Shells

Effects of Tension–compression Asymmetry on the Surface Wrinkling of Film–substrate Systems

Orientable Wrinkles in Stretched Orthotropic Films

Wrinkling of a stiff thin film bonded to a pre-strained, compliant substrate with finite thickness

A Finite Strain Model Predicts Oblique Wrinkles in Stretched Anisotropic Films

Stability boundaries for wrinkling in highly stretched elastic sheets

Wrinkle-free membranes through spatioselective exposure