Abstract:Existing experimental studies have shown that the dynamic morphology of dielectric elastomer (DE) membranes can effectively, and reproducibly remove biofouling, but a convincing theory to quantitatively explain anti-biofouling performance is lacking. In this study, a two-dimensional (2D) contact mechanics model is developed to quantify the effect of the wrinkling instability of DE membranes for anti-biofouling. We characterize the anti-biofouling effect by the pull-off force between the wrinkled DE membrane and biofouling. An electromechanical coupling finite element model is established, and post-buckling analysis is performed to predict the wrinkling instability morphology of the DE membrane caused by the Maxwell stress. The dimensionless pull-off force expressions for single-, double-, and multi-point attachments are derived. We define a dominant dimensionless parameter, the ratio of the wrinkle amplitude to wavelength ( A / λ ), revealing that it is linearly related to the dimensionless voltage after the critical drive voltage is exceeded. The influence of crucial parameters such as pre-stretch ratio, driving voltage, different DE materials, and Young's modulus on the pull-off force is systematically investigated. Results indicate that pre-stretch is necessary for resistance to biofouling and that approximately 1.5 is a preferred option. The wrinkled morphology of the DE membrane can be controlled by adjusting the drive voltage, which enables real-time regulation of the pull-off force. It is found that among the commercial DE materials investigated, VHB9473 is the preferred choice for single-point attachment, while VHB4910 is recommended for double- and multi-point attachments. The developed theoretical model opens a new path for quantitative research on the green, environmentally friendly, and sustainable anti-biofouling using intelligent materials.

Numerical Study of the Onset and Prevention of Wrinkles with Dielectric Elastomer Membrane

A Numerical Approach Based on Finite Element Method for the Wrinkling Analysis of Dielectric Elastomer Membranes

Electromechanical Behavior Of Fiber-Reinforced Dielectric Elastomer Membrane

Unique Aspects of a Shape Memory Polymer As the Substrate for Surface Wrinkling.

A Vector-Form Hybrid Particle-Element Method for Modeling and Nonlinear Shell Analysis of Thin Membranes Exhibiting Wrinkling

Contact mechanics model of wrinkling instability of dielectric elastomer membranes for anti-biofouling

Voltage-controlled radial wrinkles of a trumpet-like dielectric elastomer structure

Controlling Wrinkles on the Surface of A Dielectric Elastomer Balloon

Nucleation And Propagation Of Voltage-Driven Wrinkles In An Inflated Dielectric Elastomer Balloon

Morphology of Voltage-Triggered Ordered Wrinkles of a Dielectric Elastomer Sheet

Surface Effects On The Wrinkling Of Piezoelectric Films On Compliant Substrates

Surface effects on the wrinkles in a stiff thin film bonded to a compliant substrate

Viscoelastic Effect on the Wrinkling of an Inflated Dielectric-Elastomer Balloon

Wrinkle-free membranes through spatioselective exposure

Mechanics of Dielectric Elastomers: Materials, Structures, and Devices

Numerical and Experimental Investigation of Wrinkling Pattern for Aerospace Laminated Membrane Structures

Wrinkling and Smoothing of a Soft Shell

Surface Wrinkling of an Elastic Graded Layer.

A Novel Technique for Mechanical Characterization of Thin Elastomeric Membrane

Failure of Soft Dielectric Membrane with a Hole Subjected to Mechanical and Electric Loads

Post-wrinkling behaviors of a bilayer on a soft substrate