Abstract:Wrinkling is the phenomenon of out-of-plane deformation patterns in thin walled structures, as a result of a local compressive (internal) loads in combination with a large membrane stiffness and a small but non-zero bending stiffness. Numerical modelling typically involves thin shell formulations. As the mesh resolution depends on the wrinkle wave lengths, the analysis can become computationally expensive for shorter ones. Implicitly modeling the wrinkles using a modified kinematic or constitutive relationship based on a taut, slack or wrinkled state derived from a so-called tension field, a simplification is introduced in order to reduce computational efforts. However, this model was restricted to linear elastic material models in previous works. Aiming to develop an implicit isogeometric wrinkling model for large strain and hyperelastic material applications, a modified deformation gradient has been assumed, which can be used for any strain energy density formulation. The model is an extension of a previously published model for linear elastic material behaviour and is generalized to other types of discretisation as well. The extension for hyperelastic materials requires the derivative of the material tensor, which can be computed numerically or derived analytically. The presented model relies on a combination of dynamic relaxation and a Newton-Raphson solver, because of divergence in early Newton-Raphson iterations as a result of a changing tension field, which is not included in the stress tensor variation. Using four benchmarks, the model performance is evaluated. Convergence with the expected order for Newton-Raphson iterations has been observed, provided a fixed tension field. The model accurately approximates the mean surface of a wrinkled membrane with a reduced number of degrees of freedom in comparison to a shell solution.

Stability boundaries for wrinkling in highly stretched elastic sheets

An Existence Theorem for a Class of Wrinkling Models for Highly Stretched Elastic Sheets

Computing wrinkling and restabilization of stretched sheets based on a consistent finite-strain plate theory

A modeling and resolution framework for wrinkling in hyperelastic sheets at finite membrane strain

The Mullins effect in the wrinkling behavior of highly stretched thin films

Wrinkling instability of 3D auxetic bilayers in tension

Wrinkling and Smoothing of a Soft Shell

A Finite Strain Model Predicts Oblique Wrinkles in Stretched Anisotropic Films

A Consistent Finite-Strain Plate Model for Wrinkling of Stretched Anisotropic Hyperelastic Films

Stretch‐induced wrinkling analysis of thin sheets with splines

A Wrinkling Model for General Hyperelastic Materials based on Tension Field Theory

Generation of Buckling and Wrinkling in Elastic Films: the Effect of Initial Imperfection.

On the wrinkling and restabilization of highly stretched sheets

Surface Wrinkling of an Elastic Graded Layer.

Orientable Wrinkles in Stretched Orthotropic Films

Edge wrinkling in elastically supported pre-stressed incompressible isotropic plates

A comparative analysis of numerical approaches to the mechanics of elastic sheets

Wrinkling of fluid deformable surfaces

Nonlinear Analysis of Compressed Elastic Thin Films on Elastic Substrates: from Wrinkling to Buckle-Delamination

A variationally consistent membrane wrinkling model based on spectral decomposition of the strain tensor

Effects of Viscosity and Loading Rate on Wrinkling Dynamics and Coarsening of Floating Sheets