Abstract:Wrinkling is the phenomenon of out-of-plane deformation patterns in thin walled structures, as a result of a local compressive (internal) loads in combination with a large membrane stiffness and a small but non-zero bending stiffness. Numerical modelling typically involves thin shell formulations. As the mesh resolution depends on the wrinkle wave lengths, the analysis can become computationally expensive for shorter ones. Implicitly modeling the wrinkles using a modified kinematic or constitutive relationship based on a taut, slack or wrinkled state derived from a so-called tension field, a simplification is introduced in order to reduce computational efforts. However, this model was restricted to linear elastic material models in previous works. Aiming to develop an implicit isogeometric wrinkling model for large strain and hyperelastic material applications, a modified deformation gradient has been assumed, which can be used for any strain energy density formulation. The model is an extension of a previously published model for linear elastic material behaviour and is generalized to other types of discretisation as well. The extension for hyperelastic materials requires the derivative of the material tensor, which can be computed numerically or derived analytically. The presented model relies on a combination of dynamic relaxation and a Newton-Raphson solver, because of divergence in early Newton-Raphson iterations as a result of a changing tension field, which is not included in the stress tensor variation. Using four benchmarks, the model performance is evaluated. Convergence with the expected order for Newton-Raphson iterations has been observed, provided a fixed tension field. The model accurately approximates the mean surface of a wrinkled membrane with a reduced number of degrees of freedom in comparison to a shell solution.

A variationally consistent membrane wrinkling model based on spectral decomposition of the strain tensor

A Vector-Form Hybrid Particle-Element Method for Modeling and Nonlinear Shell Analysis of Thin Membranes Exhibiting Wrinkling

A Wrinkling Model for General Hyperelastic Materials based on Tension Field Theory

Stability boundaries for wrinkling in highly stretched elastic sheets

A wrinkling model for pneumatic membranes and the complementarity computational framework

Spontaneous Wrinkling Pattern of A Constrained Thin Film Membrane

Prediction of Wrinkles in the Membrane

A Finite Strain Model Predicts Oblique Wrinkles in Stretched Anisotropic Films

Wrinkling analysis of circular membranes by a Fourier based reduced model

A modeling and resolution framework for wrinkling in hyperelastic sheets at finite membrane strain

Wrinkling and Smoothing of a Soft Shell

A Consistent Finite-Strain Plate Model for Wrinkling of Stretched Anisotropic Hyperelastic Films

Wrinkling analysis of square space membrane structure under corner tension forces

Mechanisms of Electromechanical Wrinkling for Highly Stretched Substrate-Free Dielectric Elastic Membrane

Wrinkle-free membranes through spatioselective exposure

Crumpling of a stiff tethered membrane

Finite deformation analysis of bi-modulus thermoelastic structures and its application in wrinkling prediction of membranes

REVIEW OF METHODS OF WRINKLE STUDIES BASED ON TENSION FIELD THEORY

Wrinkling of a stiff thin film bonded to a pre-strained, compliant substrate with finite thickness

Prediction of wrinkle patterns in tensioned thin-film structures containing rigid elements

Macroscopic Simulation of Membrane Wrinkling for Various Loading Cases