Abstract:Wrinkling is the phenomenon of out-of-plane deformation patterns in thin walled structures, as a result of a local compressive (internal) loads in combination with a large membrane stiffness and a small but non-zero bending stiffness. Numerical modelling typically involves thin shell formulations. As the mesh resolution depends on the wrinkle wave lengths, the analysis can become computationally expensive for shorter ones. Implicitly modeling the wrinkles using a modified kinematic or constitutive relationship based on a taut, slack or wrinkled state derived from a so-called tension field, a simplification is introduced in order to reduce computational efforts. However, this model was restricted to linear elastic material models in previous works. Aiming to develop an implicit isogeometric wrinkling model for large strain and hyperelastic material applications, a modified deformation gradient has been assumed, which can be used for any strain energy density formulation. The model is an extension of a previously published model for linear elastic material behaviour and is generalized to other types of discretisation as well. The extension for hyperelastic materials requires the derivative of the material tensor, which can be computed numerically or derived analytically. The presented model relies on a combination of dynamic relaxation and a Newton-Raphson solver, because of divergence in early Newton-Raphson iterations as a result of a changing tension field, which is not included in the stress tensor variation. Using four benchmarks, the model performance is evaluated. Convergence with the expected order for Newton-Raphson iterations has been observed, provided a fixed tension field. The model accurately approximates the mean surface of a wrinkled membrane with a reduced number of degrees of freedom in comparison to a shell solution.

A modeling and resolution framework for wrinkling in hyperelastic sheets at finite membrane strain

Spatially Configuring Wrinkle Pattern and Multiscale Surface Evolution with Structural Confinement

A Vector-Form Hybrid Particle-Element Method for Modeling and Nonlinear Shell Analysis of Thin Membranes Exhibiting Wrinkling

Stability boundaries for wrinkling in highly stretched elastic sheets

A Wrinkling Model for General Hyperelastic Materials based on Tension Field Theory

Computing wrinkling and restabilization of stretched sheets based on a consistent finite-strain plate theory

A Consistent Finite-Strain Plate Model for Wrinkling of Stretched Anisotropic Hyperelastic Films

Stretch‐induced wrinkling analysis of thin sheets with splines

A Finite Strain Model Predicts Oblique Wrinkles in Stretched Anisotropic Films

Surface effects on the wrinkles in a stiff thin film bonded to a compliant substrate

On the wrinkling and restabilization of highly stretched sheets

An asymptotic modeling and resolution framework for morphology evolutions of multiple-period post-buckling modes in bilayers

A New Fourier-related Double Scale Analysis for Wrinkling Analysis of Thin Films on Compliant Substrates

A comparative analysis of numerical approaches to the mechanics of elastic sheets

A Two-Dimensional Fourier-Series Finite Element for Wrinkling Analysis of Thin Films on Compliant Substrates

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Macroscopic Simulation of Membrane Wrinkling for Various Loading Cases

Wrinkling and Smoothing of a Soft Shell

A variationally consistent membrane wrinkling model based on spectral decomposition of the strain tensor

Buckling of a Stiff Thin Film on a Compliant Substrate in Large Deformation

Wrinkling analysis of circular membranes by a Fourier based reduced model