Abstract:Wrinkling is the phenomenon of out-of-plane deformation patterns in thin walled structures, as a result of a local compressive (internal) loads in combination with a large membrane stiffness and a small but non-zero bending stiffness. Numerical modelling typically involves thin shell formulations. As the mesh resolution depends on the wrinkle wave lengths, the analysis can become computationally expensive for shorter ones. Implicitly modeling the wrinkles using a modified kinematic or constitutive relationship based on a taut, slack or wrinkled state derived from a so-called tension field, a simplification is introduced in order to reduce computational efforts. However, this model was restricted to linear elastic material models in previous works. Aiming to develop an implicit isogeometric wrinkling model for large strain and hyperelastic material applications, a modified deformation gradient has been assumed, which can be used for any strain energy density formulation. The model is an extension of a previously published model for linear elastic material behaviour and is generalized to other types of discretisation as well. The extension for hyperelastic materials requires the derivative of the material tensor, which can be computed numerically or derived analytically. The presented model relies on a combination of dynamic relaxation and a Newton-Raphson solver, because of divergence in early Newton-Raphson iterations as a result of a changing tension field, which is not included in the stress tensor variation. Using four benchmarks, the model performance is evaluated. Convergence with the expected order for Newton-Raphson iterations has been observed, provided a fixed tension field. The model accurately approximates the mean surface of a wrinkled membrane with a reduced number of degrees of freedom in comparison to a shell solution.

A wrinkling model for pneumatic membranes and the complementarity computational framework

A Vector-Form Hybrid Particle-Element Method for Modeling and Nonlinear Shell Analysis of Thin Membranes Exhibiting Wrinkling

An Efficient Numerical Shape Analysis for Light Weight Membrane Structures

A variationally consistent membrane wrinkling model based on spectral decomposition of the strain tensor

Large deformation and wrinkling analyses of bimodular structures and membranes based on a peridynamic computational framework

A modeling and resolution framework for wrinkling in hyperelastic sheets at finite membrane strain

Isogeometric Method for Buckling Prediction and Post-Buckling Analysis of Variable Stiffness Composite Underwater Pressure Shell

Wrinkling analysis of circular membranes by a Fourier based reduced model

Stretch‐induced wrinkling analysis of thin sheets with splines

Macroscopic Simulation of Membrane Wrinkling for Various Loading Cases

A Wrinkling Model for General Hyperelastic Materials based on Tension Field Theory

Finite deformation analysis of bi-modulus thermoelastic structures and its application in wrinkling prediction of membranes

A comparative analysis of numerical approaches to the mechanics of elastic sheets

An enhanced higher-order finite element formulation for wrinkling analysis of thick sandwich plates

Nonlinear Analysis of Compressed Elastic Thin Films on Elastic Substrates: from Wrinkling to Buckle-Delamination

Numerical and Experimental Investigation of Wrinkling Pattern for Aerospace Laminated Membrane Structures

Multiple bifurcations in wrinkling analysis of thin films on compliant substrates

Stability boundaries for wrinkling in highly stretched elastic sheets

A novel model for buckling of composite shell: Ring stiffened shell and stiffened shell with cutout under hydrostatic pressure

Analysis of buckling behavior of planar membrane structures based on vector form intrinsic finite element

Mechanism and Analytic Model of Wrinkled Geomembranes Around Circular Structures Subjected to Differential Settlement