Microstructure and Oxidation Behavior of NiCoCrAl/YSZ Microlaminates Produced by EB–PVD

Guodong Shi,Zhi Wang,Mincong Liu,Jun Liang,Zhanjun Wu

DOI: https://doi.org/10.1016/j.matchar.2011.07.018

IF: 4.537

2011-01-01

Materials Characterization

Abstract:Two NiCoCrAl/ZrO2–Y2O3 microlaminates (A and B) were fabricated by electron beam physical vapor deposition, which were different in layer number and metal-layer thickness. The layer number was 20 and 26, respectively. And the metal-layer thickness was 35 and 14μm, respectively. The microstructure and isothermal oxidation behavior were investigated. During the exposure in air at 1000°C for 100h, the t to m phase transformation occurred in the ceramic layers, and oxide scales formed at the surfaces of not only the outer metal-layers but also the internal metal-layers for the microlaminates. The oxidation rate of microlaminate B was greater than that of microlaminate A. Their overall mass gains were significantly dependent on the number and thickness of the metal-layers. The oxidation products were also influenced by metal-layer thickness. Oxide scales of the 35μm thick metal-layer microlaminate (A) consisted mainly of α-Al2O3 and θ-Al2O3, while the oxidation products of the 14μm thick metal-layer microlaminate (B) were the mixture of α-Al2O3, θ-Al2O3 and Cr2O3. It was also found that the growth of the oxide scale adjacent to the top YSZ layer was controlled by the oxygen diffusion, and that the growth of the oxide scale adjacent to the internal YSZ layer was controlled by the metal ionic diffusion.