Abstract:Hybrid fiber reinforced polymer (FRP)–concrete–steel double-skin tubular columns (hybrid DSTCs) are a novel form of columns with superior load-carrying capacity, ductility, and corrosion resistance. Such columns consist of an outer FRP tube, an inner steel tube, and the concrete filled between the two tubes. While they have attracted extensive research attention worldwide, most of the existing studies have been focused on small-scale specimens. In particular, the behavior of large-scale hybrid DSTCs with a filament-wound FRP tube and self-compacting concrete (SCC) has not been systematically investigated. Against this background, this paper presents a systematic experimental study on large-scale hybrid DSTCs under concentric compression with the following important issues being particularly investigated: the use of large-scale specimens, the use of prefabricated filament-wound FRP tubes compared with wet-layup FRP tubes, and the effect of shrinkage of SCC. The test results confirmed the excellent ductility of hybrid DSTCs and revealed that the types of concrete (SCC versus normal concrete) and FRP tube (wet-layup versus filament-wound tubes) significantly affected the compressive behavior of hybrid DSTCs. Finally, the predictions of an existing design-oriented stress–strain model for confined concrete in hybrid DSTCs, which was developed based on test results of small-scale hybrid DSTCs made with normal concrete and confined with a wet-layup FRP tube, are compared with the test results. It is shown that the model provides reasonably accurate predictions for confined concrete in the large-scale hybrid DSTCs with a typically bilinear shape, but it fails to predict the obvious axial stress drop after the first peak load caused by the large shrinkage of SCC.

Tests on Stub Stainless Steel–concrete–carbon Steel Double-Skin Tubular (DST) Columns

Experimental Investigation on Large-scale Slender FRP-Concrete-Steel Double-Skin Tubular Columns Subjected to Eccentric Compression

Behavior of Large-Scale Hybrid FRP-concrete-steel Double-Skin Tubular Columns Subjected to Eccentric Compression

Behavior of Hybrid FRP-Concrete-Steel Tubular Columns: Experimental and Theoretical Studies

Column tests of dodecagonal section double skin concrete-filled steel tubes

Analytical Behavior of CFDST Stub Columns with External Stainless Steel Tubes under Axial Compression

Behavior of Thin-Walled Dodecagonal Section Double Skin Concrete-Filled Steel Tubular Beam-Columns

Experimental Investigation of Thin-Walled Complex Section Concrete-Filled Steel Stub Columns

CFDST stub columns with galvanized corrugated steel tubes: Concept and axial behaviour

Inclined, Tapered and Sts Concrete-Filled Steel Tubular (cfst) Stub Columns under Axial Compression

Behaviour of Short and Slender Concrete-Filled Stainless Steel Tubular Columns

Tests and mechanics model for concrete-filled double skin steel tubular stub columns

Axial Compressive Behavior of Hybrid CFRP-concrete-steel Double-Skin Tubular Columns

Performance of Concrete Filled Stainless Steel Tubular (CFSST) Columns and Joints: Summary of Recent Research

Stub Column Tests on Stainless Steel Built-Up Sections

Fire Performance of Steel Reinforced Concrete-Filled Stainless Steel Tubular (CFSST) Columns with Square Cross-Sections

Concrete-Filled Double Skin (shs Outer and Chs Inner) Steel Tubular Beam-Columns

Performance of CFDST stub columns using high-strength steel subjected to axial compression

Hybrid FRP-concrete-steel double-skin tubular columns of varying slenderness ratios under eccentric compression

Preliminary investigation into behavior of beam-columns of concrete filled double skin rectangular hollow sections

Analytical behaviour of concrete-filled double skin steel tubular (CFDST) stub columns