Abstract:We have designed a hot-plate-type micro-Pirani vacuum gauge with a simple structure and compatibility with conventional semiconductor fabrication processes. In the Pirani gauge, we used a vanadium oxide (VOx) membrane as the thermosensitive component, taking advantage of the high temperature coefficient of resistance (TCR) of VOx. The TCR value of VOx is −2%K−1∼−3%K−1, an order of magnitude higher than those of other thermal-sensitive materials, such as platinum and titanium (0.3%K−1∼0.4%K−1). On one hand, we used the high TCR of VOx to increase the Pirani sensitivity. On the other hand, we optimized the floating structure to decrease the thermal conductivity so that the detecting range of the Pirani gauge was extended on the low-pressure end. We carried out simulation experiments on the thermal zone of the Pirani gauge, the width of the cantilever beam, the material and thickness of the supporting layer, the thickness of the thermal layer (VOx), the depth of the cavity, and the shape and size. Finally, we decided on the basic size of the Pirani gauge. The prepared Pirani gauge has a thermal sensitive area of 130 × 130 μm2, with a cantilever width of 13 μm, cavity depth of 5 μm, supporting layer thickness of 300 nm, and VOx layer thickness of 110 nm. It has a dynamic range of 10−1~104 Pa and a sensitivity of 1.23 V/lgPa. The VOx Pirani was designed using a structure and fabrication process compatible with a VOx-based uncooled infrared microbolometer so that it can be integrated by wafer level. This work contains only our MEMS Pirani gauge device design, preparation process design, and readout circuit design, while the characterization and relevant experimental results will be reported in the future.

Research on Micro Vacuum Measurement Device Based on Heat Transfer Principle

Research on Micromachined Pirani Gauge

A micro-machined Pirani gauge for vacuum measurement of ultra-small sized vacuum packaging

A Composite-Type MEMS Pirani Gauge for Wide Range and High Accuracy

Study of Cavity Effect in Micro-Pirani Gauge Chamber with Improved Sensitivity for High Vacuum Regime

A micro in-situ Pirani vacuum gauge for microsystem package applications

A Novel Micro Pirani Gauge with Mono-wire Sensing Unit for Microsystem Application

A Simple Micro Pirani Vasuum Gauge Fabricated by Bulk Micromachining Technology

Design of a High Sensitivity Pirani Gauge Based on Vanadium Oxide Film for High Vacuum Measurement

Surface Micromachined CMOS-MEMS Pirani Vacuum Gauge With Stacked Temperature Sensor

Overview of the MEMS Pirani Sensors

Study on Fusion Mechanisms for Sensitivity Improvement and Measurable Pressure Limit Extension of Pirani Vacuum Gauges with Multi Heat Sinks

New silicon micromechanical resonant viscosity vacuum gage

Miniature capacitance diaphragm gauge for absolute vacuum measurement

A Novel Low Pressure Sensor with Fin-Structures

Performace Improvement Of Cmos-Mems Pirani Vacuum Gauge With Hollow Heater Design

A CMOS MEMS Pirani vacuum gauge with complementary bump heat sink and cavity heater

A Mono-Metal-Wire Pressure Measuring Technology for Low Pressure Package of MEMS Devices

A MEMS Friction Gauge For High Vacuum Measurement

The electro-thermal response properties of miro pirani vacuum gauge

An Improved Physical Model Considering Mirco-Nano Scale Effects for Numerical Simulation of Pirani Vacuum Gauges