Abstract:Nanocomposite particles of amorphous carbon-Li4Ti5O12 (C-LTO) and carbon nanotube-Li4Ti5O12 (CNT-LTO) were synthesized by solvothermal method and subsequent high-temperature calcination. X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), and selected area electron diffraction (SAED) were applied to characterize the phase structure, particle morphology, and the coating structure. XRD analysis, TEM micrographs, HR-TEM images and SAED analysis revealed that both LTO particles exhibited a well-developed spinel nanocrystal structure with average sizes between 20-70 nm. The C-LTO particles exhibited roughly spherical shape coated by an amorphous carbon layer up to 10 nm in thickness. The CNT-LTO samples showed uniform square nanocrystals with edge length around 20 nm and nanoscale graphitic layers covering the surface, revealing the carbon nanotubes interconnection networks among the particle assemblies. Electrochemical studies of lithium insertion/extraction performance are evaluated by the galvanostatic charge/discharge tests, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Both LTO particles showed the superior initial discharge capacity of more than 200 mAh/g at 1/10C rate. The irreversible capacity of the C-LTO particles at more cycles was due to large polarization resulted from excessive carbon and possible residual precursors. The CNT-LTO particles show larger reversible capacity and enhanced electrochemical Li+ insertion/extraction kinetics at different cycling rates. The comparative structural and electrochemical analyses demonstrated that both nanoscale graphitic covering layers and the CNT interconnection networks increase the electronic conductivity and improve the kinetics rates of lithium insertion/extraction in the CNT-LTO particles.

Synthesis And Electrochemical Properties Of Li4ti5o12/Cuo Anode Material For Li-Ion Batteries

Synthesis and Electrochemical Properties of Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>/CuO Anode Material for Li-Ion Batteries

High Rate Li4Ti5O12–Fe2O3 and Li4Ti5O12–CuO Composite Anodes for Advanced Lithium Ion Batteries

Li2CuTi3O8–Li4Ti5O12 Double Spinel Anode Material with Improved Rate Performance for Li-ion Batteries

Synthesis of Carbon-Coated Li 4 Ti 5 O 12 and Its Electrochemical Performance As Anode Material for Lithium-Ion Battery

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Structure and Electrochemical Properties of Spinel Li4ti5o12 Nanocomposites As Anode for Lithium-Ion Battery

Preparation and Electrochemical Properties of Spherical Li4Ti5O12/C Material

Preparation and Characterization of Porous Spherical Li_4Ti_5O_(12)/C Anode Material for Lithium Ion Batteries

Solid-State Synthesis and Electrochemical Performance of Li4Ti5O12/(Ag+C)Electrode Material

Improving the electrochemical properties of Al, Zr Co-doped Li4Ti5O12 as a lithium-ion battery anode material

Enhanced Electrochemical Performance of a Novel Li4Ti5O12 Composite As Anode Material for Lithium-Ion Battery in a Broad Voltage Window

Preparation and Electrochemical Performance of Li4Ti5O12/Co3O4 Composite as an Anode of Lithium-Ion Battery

Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries

Controllable Synthesis of CuO and Its Electrochemical Performances As Anode in Li-ion Batteries

Solid-State Synthesis and Electrochemical Performance of Li_4Ti_5O_(12)/C(Ag+C)Electrode Material

Molten Salt Synthesis of Transition Metal Oxides Doped Li4Ti5O12 As Anode Material of Li-Ion Battery

Spinel Li4–2xCo3xTi5–xO12 (0 ≤ X ≤ 0.5) for Lithium-Ion Batteries: Crystal Structures, Material Properties, and Battery Performances

Preparation and electrochemical performances of cubic shape Cu2O as anode material for lithium ion batteries

Preparation and Characterization of Ge4+-doping Li4Ti5O12 Anode Material for Li-ion Battery and Its Electrochemical Properties

Synthesis and Electrochemical Performance of Nano-Sized Li4Ti5O12 with Double Surface Modification of Ti(III) and Carbon