Abstract:Powders of spinel Li4Ti5−xVxO12 (0≤x≤0.3) were successfully synthesized by solid-state method. The structure and properties of Li4Ti5−xVxO12 (0≤x≤0.3) were examined by X-ray diffraction (XRD), Raman spectroscopy (RS), scanning electronic microscope (SEM), galvanostatic charge–discharge test and cyclic voltammetry (CV). XRD shows that the V5+ can partially replace Ti4+ and Li+ in the spinel and the doping V5+ ion does almost not affect the lattice parameter of Li4Ti5O12. Raman spectra indicate that the Raman bands corresponding to the Li–O and Ti–O vibrations have a blue shift due to the doping vanadium ions, respectively. SEM exhibits that Li4Ti5−xVxO12 (0.05≤x≤0.25) samples have a relative uniform morphology with narrow size distribution. Charge–discharge test reveals that Li4Ti4.95V0.05O12 has the highest initial discharge capacity and cycling performance among all samples cycled between 1.0 and 2.0V; Li4Ti4.9V0.1O12 has the highest initial discharge capacity and cycling performance among all samples cycled between 0.0 and 2.0V or between 0.5 and 2.0V. This excellent cycling capability is mainly due to the doping vanadium. CV reveals that electrolyte starts to decompose irreversibly below 1.0V, and SEI film of Li4Ti5O12 was formed at 0.7V in the first discharge process; the Li4Ti4.9V0.1O12 sample has a good reversibility and its structure is very advantageous for the transportation of lithium-ions.

Li2CuTi3O8–Li4Ti5O12 Double Spinel Anode Material with Improved Rate Performance for Li-ion Batteries

High Rate Li4Ti5O12–Fe2O3 and Li4Ti5O12–CuO Composite Anodes for Advanced Lithium Ion Batteries

Synthesis And Electrochemical Properties Of Li4ti5o12/Cuo Anode Material For Li-Ion Batteries

Synthesis and Electrochemical Performances of Li4Ti4.95Al0.05O12/C As Anode Material for Lithium-Ion Batteries

Synthesis and Electrochemical Properties of Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>/CuO Anode Material for Li-Ion Batteries

Spinel Li4–2xCo3xTi5–xO12 (0 ≤ X ≤ 0.5) for Lithium-Ion Batteries: Crystal Structures, Material Properties, and Battery Performances

Lithium Chromium Oxide Modified Spinel LiCrTiO4 with Improved Electrochemical Properties

Improving the Lithium Storage Properties of Li4Ti5O12 Anodes by Facile Two-Phase Formation and Nanostructure Engineering Strategy

Solvothermal synthesis of micro-/nanoscale Cu/Li 4 Ti 5 O 12 composites for high rate Li-ion batteries

Li4Ti5O12 Modified LiMn2O4 Hollow Microspheres As High Rate Cathode Materials for Lithium-Ion Batteries

High-performance Li4Ti5−xVxO12 (0≤x≤0.3) As an Anode Material for Secondary Lithium-Ion Battery

Improving the electrochemical properties of Al, Zr Co-doped Li4Ti5O12 as a lithium-ion battery anode material

Nano-sized Li4Ti5O12 Anode Material with Excellent Performance Prepared by Solid State Reaction: the Effect of Precursor Size and Morphology

Dual-Modified Li 4 Ti 5 O 12 Anode by Copper Decoration and Carbon Coating to Boost Lithium Storage

Improved Capacity and Rate Capability of Fe2O3 Modified Li4Ti5O12 Anode Material

Spinel Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>/C Composites as Potential Anode Materials of Lithium Batteries

Structural and Electrochemical Characteristics of Li4−xAlxTi5O12 As Anode Material for Lithium-Ion Batteries

Superior Rate Performance of Li 4 Ti 5 O 12 /tio 2 /c/cnts Composites Via Microemulsion-Assisted Method As Anodes for Lithium Ion Battery

ChemInform Abstract: Improved Capacity and Rate Capability of Fe2O3 Modified Li4Ti5O12 Anode Material.

Li4Ti5O12 anode materials applied in lithium ion batteries

Co2+Xti1-Xo4 Nano-Octahedra As High Performance Anodes for Lithium-Ion Batteries