Abstract:For advanced performance lithium-ion batteries (LIBs) various novel electrode materials with high energy density have been extensively investigated. Cobaltosic oxide (Co3O4), commonly used as an anode in LIBs, has attracted much interest because of its high theoretical specific capacity (890 mAh center dot g(-1)), high tap density, and stable chemical properties. However, its practical use has been hindered because of its low electronic conductivity and poor rate capability. To address these problems, we investigated a liquid phase precipitation method followed by thermal treatment and obtained a unique lamellar Co3O4 powder. Its X-ray diffraction (XRD) diffraction peaks match the standard pattern for cubic phaseCo(3)O(4) with good crystallinity. We found that the Co3O4 powder consists of many irregular sheets (1.5-3.0 mu m in diameter, 100-300 nm in thickness) with numerous poles by scanning electronmicroscopy (SEM). Additionally, the surface area was about 30.5m(2) center dot g-1, and this was calculated from BET nitrogen adsorption isotherm measurement data. Remarkably, perfect performance was obtained as evaluated by electrochemical measurements, including a high initial discharge capacity (1444.5 mAh center dot g(-1) at 0.1C) and excellent capacity retention (charge capacity after 50 cycles was still greater than 1100.0 mAh center dot g(-1) at 0.1C). However, its rate capability was still not adequate (75.3% of the first charge capacity after 50 cycles at 1C). To improve the rate capability, commercial carbon nanotubes (CNTs) mixed with the Co3O4 powder was used to enhance the electronic conductivity. The charge capacity retention ratios were 96.3% after 70 cycles at 1C and 97.0% after 50 cycles at 2C. Therefore, enhanced electrochemical performance with impressive rate capability was obtained, as expected.

Preparation and electrochemical performances of cubic shape Cu2O as anode material for lithium ion batteries

Controllable Synthesis of CuO and Its Electrochemical Performances As Anode in Li-ion Batteries

Octahedral Core–shell Cuprous Oxide/carbon with Enhanced Electrochemical Activity and Stability As Anode for Lithium Ion Batteries

Pillow-shaped Porous CuO As Anode Material for Lithium-Ion Batteries

Self-assembled synthesis of hierarchical nanostructured CuO with various morphologies and their application as anodes for lithium ion batteries

Formation of Dumbbell and Sphere-Like CuO As High-Performance Anode Materials for Lithium Ion Batteries

Simple synthesis of surface-modified hierarchical copper oxide spheres with needle-like morphology as anode for lithium ion batteries

Synthesis and electrochemical properties of cubic-like ZnMoO4 anode materials

Micro-/Nanostructured Co3O4 Anode with Enhanced Rate Capability for Lithium-Ion Batteries

Dandelion-like Hollow Microspheres of CuO As Anode Material for Lithium-Ion Batteries

Thermal Oxidation Synthesis of CuO/Cu Anode Materials and the Structure and Electrochemical Properties

High-performance hierarchical cypress-like CuO/Cu2O/Cu anode for lithium ion battery

Synthesis And Electrochemical Properties Of Li4ti5o12/Cuo Anode Material For Li-Ion Batteries

Synthesis of different CuO nanostructures from Cu(OH)2 nanorods through changing drying medium for lithium-ion battery anodes

Multi-yolk-shell Copper Oxide@carbon Octahedra As High-Stability Anodes for Lithium-Ion Batteries

Cu Doped V(2)O(5)Center Dot Xh(2)O Nanostructures For Rechargeable Lithium Batteries

Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries

Facile Synthesis of MnO/C Anode Materials for Lithium-Ion Batteries

Chemical Reduction of Nano-Scale Cu2Sb Powders As Anode Materials for Li-ion Batteries

Synthesis and Electrochemical Properties of Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>/CuO Anode Material for Li-Ion Batteries

Enhanced High Rate Properties of Ordered Porous Cu2O Film As Anode for Lithium Ion Batteries