Abstract:We investigate the surface modification by laser texturing and effects thereof on the tribological performance in Al2O3. By detailed observation for microstructure evolution, it has been shown that there were three distinct modification morphologies by laser treatment: dense surface microfeatures, "coral" dendritic structures, and coarse grains. X-ray diffraction (XRD) results indicated that there was no formation of metastable phases due to low supercooling in solidification in the nanosecond laser regime. The formation of AlN compounds in the laser-treated region was examined by using x-ray photoelectron spectroscopy (XPS), which led to dense surface microfeatures and randomly distributed pores formation in the laser treated region. The formation of "coral" dendritic structures on the edge of groove and coarse grains in the vicinity of the laser surface was attributed to the fast-cooling rates. Wear tests were carried out to analyze the effect of laser texturing on tribological performance. The results of coefficients of friction (COF) illustrated that laser texturing can significantly improve COFs for dry friction; however, it decreases the COFs for wet friction. The mechanism of wear was explained based on a SEM measurement for worn surfaces; the formation of surface texture can store abrasive particles and debris lead to hydrodynamic lubricant film formation and the COFs significantly reducing for wet friction.

Characteristic of Laser Texturing Surface Aided with Abbott Curve

Surface characterization and alternate of related technological parameters for LST

Technique Influence on Cast-Iron Surface Textures Induced by Lst

Surface Texturing with Laser Multiple-Spot Scanning Technology

Study of Laser Surface Texturing for Improving Tribological Properties

Effect of laser surface micro-modeling on tribological properties

Laser Texturing of Rolled Surfaces

Surface Modification and Effects on Tribology by Laser Texturing in Al2O3.

Hierarchical microtextures generated by pulsed-laser manufacturing for surface geometry modulation

Wettability-Oriented Laser Microgrooving Process on Cemented Carbide Surface

An Experimental Investigation of Tribological Performance of Triangular Textures in Water Lubrication Regime

Analysis of synergistic friction reduction effect on micro-textured cemented carbide surface by laser processing

The Relationships of Excimer Laser Processing Parameters and Modified Surface Topography Parameters

Laser Dulling for Roll Surface by Pulsed Nd:YAG Laser

An Effective Method of Edge Deburring for Laser Surface Texturing of Co-Cr-Mo Alloy

Influence of laser surface texturing on tribological performance of mechanical components

Effect of Surface Modification on Wettability and Tribology by Laser Texturing in Al2O3.

An Experimental Investigation on Laser Surface Texturing of AISI D2 Tool Steel using Nanosecond Fiber Laser

Optimization of Tribological Characteristics of a Combined Pattern Textured Surface Using Taguchi Design

Cooperative Effect of Surface Alloying and Laser Texturing on Tribological Performance of Lubricated Surfaces

Pit Morphology Evolution Law of 3A21 Aluminum Alloy Surface in Laser Texturing