Abstract:In this paper, a novel MEMS accelerometer with tuned quasi-zero stiffness stabilized and operated in a closed-loop is proposed. By using the electrostatic softening effect of the double-sided comb-finger capacitors and the triangular capacitors, the effective stiffness of the accelerometer can be adjusted to quasi-zero. The variation of the electrostatic stiffness arising from the thermal drift of the proposed quasi-zero stiffness accelerometer can be greatly reduced when utilizing the double-sided comb-finger capacitors. For a high-sensitivity and high-linearity acceleration measurement, a traditional proportional-integral-derivative (PID) controller and a proportional-integral sliding mode (PISM) controller are designed for the stabilization near the border of pull-in. The parameters of the controller are tuned to ensure that the proof mass is stably positioned at the desired position. Both the simulation and experiment validate the feasibility of two controllers, showing distinct transient characteristics and long-term stability performance. Compared to the open-loop accelerometer with untuned stiffness, the sensitivity of the closed-loop accelerometer is increased over 40 times while the long-term stability of the closed-loop accelerometer with quasi-zero stiffness is remarkably improved for both controllers. The PID-controlled accelerometer with quasi-zero stiffness has an Allan bias instability as low as 22.51 ng and narrow bandwidth of 0.36 Hz. The PISM controlled accelerometer with quasi-zero stiffness has a linearly varied Allan bias instability from 37 ng to $2.02 ~\mu \text{g}$ depending on the switching gain which determines the acceleration input range. However, the bandwidth of the PISM control system exhibits a nonlinear and wide-range variation with respect to the switching gain.

A Zero-Offset Auto-Correction Circuit for Piezoresistive Micromachined Accelerometer

A CMOS interface circuit for piezoresistive accelerometer

A Low-Power Digital Processing Circuit for Capacitive Accelerometer

A Stiffness-Tunable MEMS Accelerometer

Temperature Compensation Method for MEMS Accelerometer Based on Resonant Frequency

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

Development of a Novel Strategy Based on In-Process Compensation of Charge Leakage for Static Force Measurement by Piezoelectric Force Sensors

Study on Zero Drift of Charge Amplifier Based on MOSFET 3N165 and OPA LF356N

Interface circuit with zero compensation function for capacitive microaccelerometers

A Piezoresistive-Sensor Nonlinearity Correction on-Chip Method with Highly Robust Class-AB Driving Capability

Combined Temperature Compensation Method for Closed-Loop Microelectromechanical System Capacitive Accelerometer

Study of self-calibrating MEMS accelerometers

A New Method for Accelerometer Dynamic Compensation Based on CMAC

Stabilization Control of a MEMS Accelerometer With Tuned Quasi-Zero Stiffness

Compensating Method of Zero Drift for Magneto-Sensing Torque Sensors

A Novel Low Output Offset Voltage Charge Amplifier for Piezoelectric Sensors

Analysis and Design of Piezoelectric Sensor Conditioning Circuit

A Digital Readout Interface For A Surface Micromachined Mems Accelerometer With A Novel Loop Compensator

An Offset-Compensated Switched-Capacitor Interface Circuit for Closed-Loop Mems Capacitive Accelerometer

A Low-Noise Low-Offset CMOS Readout Circuit for MEMS Capacitive Accelerometers

Interface Circuit Of Sigma-Delta Accelerometer With On-Chip-Test Function