Abstract:Ultrahigh‐speed casting is the most remarkable feature of billet high‐efficiency continuous casting. The transient fluid flow, heat transfer, and solidification behavior under different casting speeds, submerged entry nozzle (SEN) parameters, and mold electromagnetic stirring (M‐EMS) are investigated using a 3D transient mathematical model. The results show that a typical roll flow pattern is generated for all casting speeds, while a third small recirculation zone developed near the solidified shell at the casting speed of 6.0 m min−1. When the casting speed increases, the impact depth of the molten steel increases from 0.748 to 0.844 m, the velocity and level fluctuation at the steel/slag interface increases, the high‐temperature zone moves downward, and the shell thickness is reduced from 16.2 to 11.1 mm. As the SEN inner diameter and immersion depth increases, the impact depth increases, the velocity and level fluctuation at the steel/slag interface decreases, and the shell thickness at the mold exit is ≈11.0 mm. When the SEN immersion depth and inner diameter are 120 and 40 mm, respectively, the flow and temperature fields in the mold are the most appropriate. In addition, the M‐EMS have a great effect on the fluid flow and heat transfer behavior. A coupled 3D numerical model is established to study the fluid flow, heat transfer, and solidification in a billet continuous casting mold under different casting speeds, submerged entry nozzle (SEN) inner diameters, SEN immersion depths, and mold electromagnetic stirring (M‐EMS). The velocity field, temperature field, steel/slag level fluctuation, and the growth of solidified shell are analyzed comparatively.

Numerical Study on Temperature Behavior of Beam Blank Continuous Casting Molds

Numerical Simulation of the Thermo-Mechanical Process for Beam Blank Continuous Casting

Thermo-mechanical simulation and parameters optimization for beam blank continuous casting

Finite element numerical simulation on Thermo Mechanical couple in bloom mold

Thermomechanical Analysis and Optimisation for Beam Blank Continuous Casting

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

A 3D model coupled inverse algorithm for the non-uniform thermal behavior of a continuous casting mold

A Three Dimensional Real-time Heat Transfer Model for Continuous Casting Blooms

Numerical Simulation of Solidification and Heat Transfer in Continuously Cast Bloom

Numerical Simulation on Thermo-Mechanical Coupling in Bloom Mold by Finite Element Method

Thermomechanical Model of Heat Transffer in Bloom Casting Mold

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation

Analysis of Thermomechanical Behavior in Continuous Bloom Casting Mold

Numerical Simulation of Temperature Field and Grain Structure in Cu-10Al Alloy Produced by Heated Mould Continuous Casting

Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in Ultrahigh Speed Continuous Casting Billet Mold

Three-dimensional FEM Study of Fluid Flow in Mould for Beam Blank Continuous Casting: Influence of Nozzle Structure and Parameters on Fluid Flow

Chamfer and Taper Researches of Mould in Slab Continuous Casting

Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction

Heat transfer behavior in ultrahigh-speed continuous casting mold

Thermo-mechanical Modeling in Continuous Slab Casting Mould and Its Application

Numerical modeling of the heat treatment with residual heat of aluminum castings