Abstract:In order to understand the thermal and mechanical behavior during solidification of the strand in the slab casting mould, a two-dimensional coupled thermo-mechanical finite element model was built and the corresponding FEM program was developed. The model simulates a quarter of the transverse section of the strand as it moves down in the mould at the casting speed. The heat transfer in the mould and the strand is analyzed with the steady model and the transient model, respectively. A thermo-elastoplastic plane stress model is used for analyzing the strand deformation. The heat transfer and the deformation are coupled through the interfacial thermal resistance between the strand and the mould. The model was used to investigate the effects of mould corner configuration and mould taper on the crack formation tendency of strand. The results show that employing a chamfered mould with proper corner size could modify the 2D heat transfer conditions at slab corners, hence reducing the risk of transverse corner cracks. Likewise, employing an optimized parabolic mould taper could remarkably achieve better uniformity of the strand temperature and stress, and simultaneously reduce the peak value of the stress, thus resulting in less crack occurrence, which favorably coincides with the theoretical expectation. The successful application of the coupled thermo-mechanical model demonstrates its tremendous potentialities for further understanding of the internal crack formation and for the optimization of operation parameters and the mould configuration.

Thermomechanical Model of Heat Transffer in Bloom Casting Mold

Analysis of Thermomechanical Behavior in Continuous Bloom Casting Mold

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Finite element numerical simulation on Thermo Mechanical couple in bloom mold

Numerical Simulation on Thermo-Mechanical Coupling in Bloom Mold by Finite Element Method

Thermo-mechanical Modeling in Continuous Slab Casting Mould and Its Application

Thickness Distributions of Mold Flux Film and Air Gap in Billet Ultra-High Speed Continuous Casting Mold Through Multiphysics Modeling

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Numerical Simulation of the Thermo-Mechanical Process for Beam Blank Continuous Casting

Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction

Coupled Mathematical Model of Thermal Stress for Initial Shell of Groove Continuous Casting Mold

Finite Element Analysis of Shell Growth in a Continuous Casting Mold

The Effect of Mold Structure and Cooling Parameters on Heat Transfer during Billet High-Speed Continuous Casting

Finite Element Thermal-Mechanical Coupled Analysis of Strand Bulging Deformation in Continuous Casting

Investigation on Heat Transfer in Molds with Different Water-Cooling Structures Under Billet High-Speed Continuous Casting

Modelling of continuous casting processes parameters on the shrinkage cavity formation in bearing steel blooms

Thermomechanical Analysis and Optimisation for Beam Blank Continuous Casting

Numerical Simulation of Solidification and Heat Transfer in Continuously Cast Bloom

Simulation of the Flow-Heat Transfer Process in Billet Mold and Analysis of the Billet Rhomboidity Phenomenon

Heat transfer behavior in ultrahigh-speed continuous casting mold

A coupled model on fluid flow, heat transfer and solidification in continuous casting mold