Abstract:Ultrahigh‐speed casting is the most remarkable feature of billet high‐efficiency continuous casting. The transient fluid flow, heat transfer, and solidification behavior under different casting speeds, submerged entry nozzle (SEN) parameters, and mold electromagnetic stirring (M‐EMS) are investigated using a 3D transient mathematical model. The results show that a typical roll flow pattern is generated for all casting speeds, while a third small recirculation zone developed near the solidified shell at the casting speed of 6.0 m min−1. When the casting speed increases, the impact depth of the molten steel increases from 0.748 to 0.844 m, the velocity and level fluctuation at the steel/slag interface increases, the high‐temperature zone moves downward, and the shell thickness is reduced from 16.2 to 11.1 mm. As the SEN inner diameter and immersion depth increases, the impact depth increases, the velocity and level fluctuation at the steel/slag interface decreases, and the shell thickness at the mold exit is ≈11.0 mm. When the SEN immersion depth and inner diameter are 120 and 40 mm, respectively, the flow and temperature fields in the mold are the most appropriate. In addition, the M‐EMS have a great effect on the fluid flow and heat transfer behavior. A coupled 3D numerical model is established to study the fluid flow, heat transfer, and solidification in a billet continuous casting mold under different casting speeds, submerged entry nozzle (SEN) inner diameters, SEN immersion depths, and mold electromagnetic stirring (M‐EMS). The velocity field, temperature field, steel/slag level fluctuation, and the growth of solidified shell are analyzed comparatively.

A 3D model coupled inverse algorithm for the non-uniform thermal behavior of a continuous casting mold

A coupled model on fluid flow, heat transfer and solidification in continuous casting mold

A Three Dimensional Real-time Heat Transfer Model for Continuous Casting Blooms

Finite element numerical simulation on Thermo Mechanical couple in bloom mold

Three-dimensional heat transfer analysis in a funnel type mold for thin slab continuous casting

Heat transfer behaviour of funnel mould copper plates during thin slab continuous casting and channel structure optimization

A simulation method for the optimization of cooling water slot structure in slab continuous casting mold combined with submerged entry nozzle

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Optimization of Billet Tube Mold Designs for High-Speed Continuous Casting

Thickness Distributions of Mold Flux Film and Air Gap in Billet Ultra-High Speed Continuous Casting Mold Through Multiphysics Modeling

Investigation on non-uniform friction behaviors of slab during continuous casting based on an inverse algorithm

Heat transfer behavior in ultrahigh-speed continuous casting mold

Graphics‐Processing‐Unit‐Accelerated 3D Online Heat Transfer and Solidification Model for Continuously Cast Slab

Heat-transfer and solidification model of continuous slab casting: CON1D

Investigation on Heat Transfer in Molds with Different Water-Cooling Structures Under Billet High-Speed Continuous Casting

Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold

INTEGRATED FINITE ELEMENT MODEL FOR TRANSIENT FLUID FLOW AND THERMAL STRESSES DURING CONTINUOUS CASTING

Thermo-mechanical Modeling in Continuous Slab Casting Mould and Its Application

Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in Ultrahigh Speed Continuous Casting Billet Mold

Numerical Simulation of Flow, Heat, Solidification, Solute Transfer and Electromagnetic Field for Vertical Mold and Curved Mold of Billet