Abstract:Porous silicon nitride ceramics with a biomorphic microstructure were manufactured by car- bothermal reduction and nitridation of Y_2O_3/SiO_2/charcoal composites in high concentration nitrogen atmospheres(0.6MPa) at 1600℃.These composites were prepared from pine-derived charcoal impreg- nated with yttrium-incorporated silica mixed sol by vacuum/pressure infiltration process.The influences of sintering temperature,reaction time,additive and sintering atmosphere on microstructure and phase composition were studied by XRD,SEM.The formation mechanism of Si_3N_4 was analyzed.XRD analy- sis shows that mainlyβ-Si_3N_4 and minor glass component of YsSi_4N_4O_(14) are detected.SEM observation reveals that the resulting porous Si_3N_4 retains the microcellular morphology of original pinewood tissue, and the remarkable rod-likeβ-Si_3N_4 grains grow from the internal walls of macroscopic pores.The sin- tering process of porousβ-Si_3N_4 consists of three stages,namely,formation of a-Si3N4,transformation ofα-βand grain growth,respectively.Nitridation is based on gas-solid and gas-gas reaction among SiO(g),N_2(g),C(s) or CO(g) for the samples treated at 1450℃.Porous ceramics with elongated fibrousβ-Si_3N_4 grain is developed by solution-reprecipitation mechanism at 1600℃.

Porous Silicon Nitride Ceramics Fabricated by Carbothermal Reduction-Reaction Bonding

Porous Silicon Nitride Ceramics Prepared by Carbothermal Reduction Method

Synthesis of Porous Silicon Nitride Ceramics from Diatomite

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Porous Silicon Nitride Ceramics Prepared by Reduction-Nitridation of Silica

Synthesis of Fibrous Β-Si3n4 Structured Porous Ceramics Using Carbothermal Nitridation of Silica

Biomimetic Synthesis of Porous Si_3N_4 Ceramics

Porous Silicon Nitride Ceramics Prepared by Reduction – Nitridation of Diatomite

Fabrication of Porous Silicon Nitride with High Porosity by Diatomite

Synthesis and Mechanical Properties of Highly Porous Ultrafine-Grain Si3N4 Ceramics Via Carbothermal Reduction-Nitridation Combined with Liquid Phase Sintering

Porous 2h‐silicon Carbide Ceramics Fabricated by Carbothermal Reaction Between Silicon Nitride and Carbon

Effects of Sintering Additives on Properties of Porous Silicon Nitride Ceramics Fabricated by Carbothermal Reduction

Effects of α-Si3N4 seeds and sintering additives on properties of porous silicon nitride ceramics fabricated by carbothermal reduction

Fabrication and Strengthening of Porous Si3N4 Ceramics by Replacement of Oxide Phase with Si3N4 at Grain Boundary Through Carbothermal Nitridation

Synthesis and properties of porous SiN/SiC nanocomposites by carbothermal reaction between SiN and carbon

Microstructure Control and Mechanical Properties of Porous Silicon Nitride Ceramics

Biomorphic Silicon Nitride Ceramics with Fibrous Morphology Prepared by Sol Infiltration and Reduction–Nitridation

POROUS Β-Sialon/si3n4 CERAMICS PREPARED BY REACTIVE SINTERING

Preparation of Porous Si3N4 Ceramics with Controlled Porosity and Microstructure by Fibrous Α‐si3n4 Addition

Highly Porous Silicon-Based Ceramics Fabricated with Restrained Sintering by Reaction Bonding (Rsrb)

Microstructure and Mechanical Properties of Porous SiC Ceramics by Carbothermal Reduction and Subsequent Recrystallization Sintering