Abstract:This paper reports a new stick-slip piezoelectric linear actuator with large load density, compact size, and high resolution. It is devised using a dual-arch bridge-type driving mechanism (DBDM) and an integrated elliptical preload mechanism(IEPM). The DBDM can generate a coupling motion on the driving point, which provides clamping and releasing actions during stick-slip motion. Also, the DBDM can magnify the clamping force with large amplification ratios, thus improving driving force and load-carrying capacity. The IEPM uses compact flexure hinges to adjust preload force, reducing structural dimension. Then, theoretical analysis and simulations are conducted, and a prototype is fabricated. A modified driving voltage with smooth turning points is designed to improve motion properties further. Experiments show that load density is 0.037 g/mm $^{\mathbf{3}}$ under the driving voltage of 100 V. The actuator has an overall size of 33.6 mm $\times$ 20 mm $\times$ 8 mm and a displacement resolution of 22 nm. Note to Practitioners —Most research on linear actuators focused on motion displacement improvement, and more research needs to be done on improving load-carrying capacity. Therefore, this paper designs a force amplification linear actuator with a compact structure using the DBDM. In the experimental stage, the sudden change of the driving signal affects the output performance, and a modified sawtooth voltage is used to improve the output speed and load-carrying capacity. The experimental results show that under the modified sawtooth wave voltage, the maximum speed of the slider is 1.4 mm/s, and the speed is increased by 17% compared with the traditional wave. When a 200 g load is applied to the slider, the linear actuator operates at a stable speed of 1.2 $\mu $ m/s, 33% faster than conventional sawtooth waves. As a result, the designed actuator has superior performance at higher loads.

An Out-of-plane Electrostatic Actuator Based on the Lever Principle

Out-of-Plane Comb-Drive Lever Actuator

Electrostatically-Driven-Leverage Actuator as an Engine for Out-of-plane Motion

Rigid Electrodes Enhance the Strain and Force Output of Peano-HASEL Actuators

Silicon-On-Insulator Out-Of-Plane Electrostatic Actuator with in Situ Capacitive Position Sensing

Coupled-field finite element analysis of MEMS compound electrostatic actuator by using the ANSYS software

Electrostatic Comb-Drive Actuator for Mems Relays/Switches with Double-Tilt Comb Fingers and Tilted Parallelogram Beams

A Novel Mumps-Compatible Single-Layer Out-Of-Plane Electrothermal Actuator

Experimental analysis of a low controlling voltage tri-electrode MEMS electrostatic actuator for array applications

Laterally driven electrostatic repulsive-force microactuators using asymmetric field distribution

Culotte bifurcation stenting with paclitaxel drug-eluting stent.

Modeling of Planar Hydraulically Amplified Self-Healing Electrostatic Actuators

Large Displacement Spring-Like Electro-Mechanical Thermal Actuators with Insulator Constraint Beams

A piezoelectric inchworm actuator of linear type using symmetrical lever amplification

Design and Fabrication of a Metal-Silicon Actuator With Low Voltage, Low Power Consumption and Large Displacement

A New Stick-Slip Piezoelectric Actuator Using Dual-Arch Bridge-Type Compliant Mechanisms

High-performance liquid metal electromagnetic actuator fabricated by femtosecond laser

A novel microelectrostatic torsional actuator

Hybrid Electrostatic Actuator for Micromirror Tilting

Large actuation in an electromechanical actuator using gel, elastomer, and oil

Dynamics of Electrostatic MEMS Actuators