Abstract:UHTCC (ultrahigh toughness cementitious composite), which is a kind of ultrahigh toughness cementitious composites material, exhibits pseudo strain hardening feature when subjected to tension load, and has enormous ductility and prominent crack dispersal ability. Accordingly, UHTCC can improve mechanical behavior of ordinary concrete structure especially its durability, and has been regarded as historical breakthrough to traditional cementitious materials. In this paper, the study focuses on flexure behavior of steel reinforced beam made of UHTCC. Based on the plane section assumption, along with two equilibrium equations of force and moment, the formulae to calculate the flexural load capability for the reinforced ultrahigh toughness cementitious composite (RUHTCC) beam were developed under the assumption that the compression stress-strain relationship in the UHTCC material is a bilinear model. Following this, the simplified formulae were further evolved by effective rectangle stress distribution approach in order to facilitate design of practical engineering. Two effective parameters introduced in effective rectangle approach were determined. The mathematical expressions to evaluate limited reinforcement ratio, flexural stiffness as well as ductility index were proposed, too. Last, two series of different reinforcement ratios of the RUHTCC beams were tested in four-point flexure loading. For comparison purposes, ordinary RC (reinforced concrete) beams also were prepared. Both moment curvature curves and load mid-span displacement curves were recorded and compared with the theoretical calculations. A good agreement between them was found, which validates the proposed theoretical formulae. For ductility index, a slightly big difference between the experimental values and the calculated ones exists. The experimental results show that, compared to control RC beams, the RUHTCC beam can improve both flexural capacity and ductility index, and the degree of improvement will decrease with the increase in the reinforcement ratio. Particularly, the results also reveal that lager crack width in control beams can be greatly reduced by formation of tightly-spaced fine cracks in UHTCC, which offers more durable structures.

Effectiveness of UHTCC to retard cover expansive cracking due to corrosion of rebar in RC structure

Flexural and Crack Behaviors of RC Beams Applied with UHTCC Cover Subjected to Rebar Corrosion

Corrosion resistance of reinforced concrete beams with cover replaced by UHTCC

A Design Concept with the Use of Ruhtcc Beam to Improve Crack Control and Durability of Concrete Structures

DUCTILITY AND DURABILITY ENHANCEMENT IN STEEL REINFORCED MEMBERS THROUGH INTRODUCTION OF UHTCC WITH STRAIN-HARDENING TENSION CHARACTERISTIC

Cover Cracking Model in Reinforced Concrete Structures Subject to Rebar Corrosion

A study on flexural performance of RC beam strengthened with UHTCC for improved durability

Modeling of Time to Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

DURABILITY PERFORMANCE OF RUHTCC BEAM UNDER FLEXURAL LOAD

Analysis and experiment of reinforced ultra-high toughness cementitious composite flexural members

Improvement of the flexural and cracking behavior of RC beams using ultra-high toughness cementitious composites(I):theoretical analysis

Reinforcement Corrosion-Induced Cover Cracking and Its Time Prediction for Reinforced Concrete Structures

Four Point Bending Experimental Investigation on Reinforced Ultra High Toughness Cementitious Composite Beams

Steel Rebar Effect on Tensile and Cracking Behavior of UHPFRC Based on Direct Tensile Tests and Digital Image Correlation

THEORETICAL ANALYSIS ON FLEXURAL BEHAVIOR OF REINFORCED ULTRA HIGH TOUGHNESS CEMENTITIOUS COMPOSITE MEMBERS

Improvement on flexural and cracking behavior of RC beam using ultra-high toughness cementitious composite Ⅱ: experimental study

Effect of Corrosion on Bond Behaviors of Rebar Embedded in Ultra-High Toughness Cementitious Composite

Damage Analysis and Cracking Model of Reinforced Concrete Structures with Rebar Corrosion

Study on the Corroded Hollow Section RC Columns Strengthened by ICCP-SS System

Analysis on the Cracking of Concrete Cover Due to Rebar Corrosion

Theoretical Analysis and Experimental Investigation on Flexural Performance of Steel Reinforced Ultrahigh Toughness Cementitious Composite (RUHTCC) Beams