Analysis and experiment of reinforced ultra-high toughness cementitious composite flexural members

李庆华,徐世烺

DOI: https://doi.org/10.14006/j.jzjgxb.2010.03.008

2010-01-01

Abstract:Ultra-High Toughness Cementitious Composite (UHTCC) exhibits excellent crack controlling and energy absorbing ability, thus can remarkably improve durability and ductility of structures. To generalize the application of UHTCC in structures with high requirement of anti-crack, investigations on flexural behavior of reinforced ultra-high toughness cementitious composite (RUHTCC) members were carried out. On the basis of strain-hardening behavior of UHTCC after first-cracking, theoretical formulae were derived according to elastic theory and compared with four-point bending test results of RUHTCC long beam specimens without web reinforcement. It is discovered that crack width of RUHTCC beams is limited to 0.05 mm under service load conditions, which satisfies the limitation for structures under exposure conditions. The plane-section assumption is tenable for RUHTCC beams with the compatible state of deformation between reinforcement and UHTCC exists till yielding. A good agreement between test results and theoretical calculation is found, and the conservative calculation of the ductility index can be used to predict ductility of structures or members in practical design. Compared with conventional reinforced concrete beams, RUHTCC beams have the tendency of delayed yielding of reinforcements and improved load bearing capacity and ductility, thus may result in saving of steel to further take the advantage of UHTCC with lower reinforcement ratio.