Improvement on flexural and cracking behavior of RC beam using ultra-high toughness cementitious composite Ⅱ: experimental study

Zhang Xiufang,Xu Shilang,Hou Lijun

DOI: https://doi.org/10.3321/j.issn:1000-131X.2009.10.008

2009-01-01

Abstract:Based on first-cracking criterion and steady-cracking criterion constructed from the micromechanical model, ultra-high toughness cementitious composites material, abbreviated as UHTCC, is tailored even in case of low fiber volume faction, typically 2% by volume. This material is characterized by the pseudo tension strain-hardening under direct tension, and has high ultimate tensile strain capacity up to 3%-5%, and narrow crack width of only 60-80 μm at ultimate tension load. These advantages allow the transform of macro harmful crack into micro harmless crack and UHTCC therefore is considered to be a new promising solution to durable structures. The present paper investigated the flexural behavior of three groups of UHTCC/RC composited beams with three different reinforcement ratios, in which concrete in the region of tension zone of RC beam is partly replaced by UHTCC. The flexural load-carrying capacity, deformation ability, deformation compatibility between steel and UHTCC along with crack development in beam during the entire loading process are examined. For comparison, the ordinary reinforced concrete beams are tested as control reference, too. The experimental results reveal that, in case of the same reinforcement ratio, RC beam strengthened with UHTCC has high flexural capacity and can efficiently control crack width to obtain high durable structures in comparison with ordinary reinforced concrete beam. Moment-curvature curves and load-mid-span displacement curves of tested UHTCC/RC composited beams are calculated using the analytical formulae developed based on beam theory and compared with the experimental measurements. A good agreement between them is found.