Study on the Corroded Hollow Section RC Columns Strengthened by ICCP-SS System

Ju Chen,Jun Wang,Ji-Hua Zhu,Yuan Feng,Cheng-Bin Liu
DOI: https://doi.org/10.3390/buildings11050197
IF: 3.324
2021-01-01
Buildings
Abstract:In this paper, the behavior of corroded hollow section RC (reinforced concrete) columns strengthened by an Impressed Current Cathodic Protection and Structural Strengthening (ICCP-SS) system was investigated. The Carbon Fabric-Reinforced Cementitious Matrix (C-FRCM) composite serves dual functions in the intervention method. The axial compression behavior of strengthened columns was firstly investigated through axial compression tests. The influence of corrosion ratio and C-FRCM strengthening on the test results, such as failure mode, load-displacement curve, ultimate load, and ultimate strain, were analyzed. Test results showed that the ultimate load of the corroded specimens could be enhanced significantly by C-FRCM, and the ductility of the strengthened specimens was larger than the specimens without strengthening, especially for the specimens with higher corrosion ratios. Secondly, the effects of the ICCP-SS system on the migration and distribution laws of chloride ions (Cl-) in hollow section RC columns were analyzed by the potentiometric titration method. The main parameters include charging time, current density, and salt addition. Results showed that the rebar would have a certain blocking effect on the migration of Cl-, which resulted in that the content of Cl- in the inner side of the rebar was always larger than that of the outer side; and research results also showed that the increase of impressed current density and charge time would reduce the Cl- content on both sides of the rebar, while the impressed current would cause the Cl- near the rebars to constantly move toward the vicinity of CFRP.
What problem does this paper attempt to address?