Abstract:2.25Cr-1Mo-0.25 V steel has been widely used to manufacture hydro-processing equipment operating under harsh environments for its good creep performance. Warm bending, a common fabricating process of 2.25Cr-1Mo-0.25 V steel ring shells, inevitably changes the creep property of 2.25Cr-1Mo-0.25 V steel, but its detailed effect still remains obscure. In this work, we experimentally investigated the impact of warm bending on the microstructure and creep behavior of 2.25Cr-1Mo-0.25 V steel. First, a series of creep rupture tests were carried out at 482 °C and 350 MPa, in which test materials were extracted from an actually fabricated ring shell and its raw plate. Thereafter, the microstructures of test materials were semi-quantitatively analyzed by various characterization techniques, such as electron backscatter diffraction (EBSD) and three-dimensional high-resolution X-ray computed tomography (3D μ-XCT). Finally, warm forming induced microstructural degradation as well as their implication for creep was discussed in detail. Creep rupture tests showed that warm bending leads to a significant decrease in creep lifetime at the surface region of virgin plate but a slight decline at the central region of virgin plate. An inhomogeneous creep resistance distribution was thereby revealed along the thickness direction of the ring shell, which could not be completely eliminated by subsequent tempering at 705 °C for 8 h. Moreover, microstructural observations demonstrated that warm deformation leads to multiple microstructural deterioration, including carbide coarsening, ferrite matrix softening, void defect increasing, etc. Their combined action appears to accelerate the creep fracture behavior of 2.25Cr-1Mo-0.25 V steel. This work will contribute to the long-term safety and integrity assessment of 2.25Cr-1Mo-0.25 V steel structures. Graphical abstract

Effect of the Out-Of-Plane Constraint on Creep Crack Growth Property of Cr-Mo-V Type Steel

Effect of constraint on creep fracture toughness of a Cr-Mo-V steel

Research on Multiaxial Creep Properties of P92 Steel Based on Improved KR Creep Constitutive Model

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

Effect and mechanism of constraint on creep crack growth behavior of GH3535 alloy

Impact of out‐of‐plane constraint on creep crack growth behavior of M174+ aluminum alloys by nano‐computed tomography (CT)

Evaluation of the Effect of Various Prior Creep-Fatigue Interaction Damages on Subsequent Tensile and Creep Properties of 9%cr Steel

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A new creep-fatigue crack growth model and a correlation of the creep-fatigue crack growth rate with unified constraint parameter

A Creep Constitutive Model, Based on Deformation Mechanisms and Its Application to Creep Crack Growth

Constraint modified time dependent failure assessment diagram (TDFAD) based on <i>C</i>(<i>t</i>)-<i>A</i><sub>2</sub>(<i>t</i>) theory for creep crack

Creep crack growth prediction using a damage based approach

Revealing influence of warm bending on creep performance of heat-resistant 2.25Cr-1Mo-0.25 V steel

The correlation between prior fatigue damage and remaining creep properties in a high chromium steel welded joint

Influence of Prior Low Cycle Fatigue on Microstructure Evolution and Subsequent Creep Behavior

Characterization of the Cyclic Softening and Remaining Creep Behaviour of P92 Steel Weldment

Characterization of creep constraint effect for brazed joint specimens at crack tip by new constraint parameter A

ON THE TIME-DEPENDENT MATERIAL FRACTURE TOUGHNESS AT HIGH TEMPERATURE

Microstructural Damage Mechanics-Based Model for Creep Fracture of 9%cr Steel under Prior Fatigue Loading

Characterization of Mismatch Constraint Effect for the Central Crack Plate under Biaxial Loading