Abstract:Cr(VI) is carcinogenic while Cr(III) is considered to be less toxic. Cr species with combined oxidation states are often found in industrial effluent. It is thus critical to develop techniques that have the capacity for the removal of both Cr(VI) and Cr(III). Here we report, for the first time, the continuous separation and recovery of Cr(III) and Cr(VI) using electrodeionization (EDI) as an advanced and efficient approach. Firstly, we have developed a new analytical method, which integrates UV-Visible spectroscopy and Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), for determining the concentrations of both Cr(VI) and Cr(III) in a mixed solution, and for monitoring the EDI process. Secondly, we have determined the limiting current and systematically studied the effects of different applied currents on the removal of Cr(VI), as well as the recovery of Cr(III) and Cr(VI). Thirdly, the influence of the level of saturation of the ion-exchange resins was assessed in terms of both removal efficiency and energy consumption. It was revealed that the use of fresh ion exchange resins for the EDI process, initially exhibited the very effective removal of both Cr(VI) and Cr(III). Both resins became increasingly saturated subsequent to each cycle, resulting in a gradual lowering of the cell voltage. The continuous and highly efficacious removal of highly toxic Cr(VI) (>99%), and low energy consumption make the EDI process attractive for the separation and recovery of Cr(VI) and Cr(III). (C) 2014 Elsevier B.V. All rights reserved.

Removal of Nickel Ions from Dilute Heavy Metal Solutions by Electrodeionization Process

Study on the performance of EDI device in dealing with Ni2+solution with dilute departments filled with cation exchange resins

Nickel-Containing Effluent Reclaming by Bipolar Membrane-Electrodeionization Process

Concentrating Dilute Nickel-Containing Solution by Using Coupled "bipolar Membrane-Electrodeionization"Process

Dilute Nickel Wastewater Treatment by Improved Electrodeionization Technology

Recovery of Nickel Ions from Dilute Solutions by Electrodeionization Process

Membrane-free Electrodeionization for Purification of Wastewater Containing Low Concentration of Nickel Ions

Effects of Feed Water Conditions on Performance of Electrodeionization Process for Removal of Ni<sup>2+</sup> from Dilute Solution

Effects of feed water conditions on performance of electrodeionization process for removal of Ni 2+ from dilute solution

Synchronous concentrating and purifying dilute nickel wastewater by electrodeionization technology

A Comparative Study Of Nickel(Ii) Removal From Electroplating Wastewater By Pre-Precipitation Combined With Fenton-Precipitation Or Fenton-Like-Precipitation

Nickel ions-containing solution treatment by 'BPM-EDI' coupled process

Recovery of nickel ions from simulated electroplating rinse water by electrodeionization process.

Influences of Operation Parameters on Concentration and Separation of Nickel-Containing Solution by Electrodeionization Process

Influence of Some Parameters on Membrane-Free Electrodeionization for the Purification of Wastewater Containing Nickel Ions

Combined RO-EDI process for treatment of nickel in water

Removal of low concentrations of nickel ions in electroplating wastewater by combination of electrodialysis and electrodeposition

Removal and recovery of Ni 2 + from electroplating rinse water using electrodeionization reversal

Separation and Recovery of Cr(Iii) and Cr(Vi) Using Electrodeionization As an Efficient Approach

Study on dilute heavy metal ions waste water treatment by EDI process

Tactfully Introducing Amphoteric Group into Electroactive Membrane Motivates Highly Efficient H2O Splitting for Reversible Removal and Recovery of Nickel(ii)