Abstract:The pollution of wastewater with hazardous heavy metals has become one of the most important worldwide environmental problems. In the electroplating industry, large amounts of discharge of untreated dilute rinse wastewater combined with increasingly stringent pollutant emission standards have limited the sustainable development of the electroplating industry. In this study, a novel integrated two-stage electrodeionization (EDI) process for recovering Ni2+ and pure water to reduce pollutant emissions in the electroplating industry was evaluated using a simulated nickel-electroplating rinse wastewater. Based on the characteristic curves, the appropriate operating voltage was determined to be 15 V for the first stage, while the second stage voltage was set at 25 V. The integrated two-stage EDI process removed more than 99.8% of the Ni2+ from the simulated electroplating rinse wastewater, eliminating 94% of the Ni2+ from the feed water (Ni2+ concentration of 50 mg L-1) in the first stage and approximately 96.7% of the remaining Ni2+ in the second stage. Additionally, a closed-circuit circulation of the concentrate stream was used to achieve the solution with Ni2+ concentration as high as 11,031 mg L-1. Pure water with resistivity value exceeding 1.6 M Omega cm was produced by extensive purification during the second stage and was able to be reused as make-up process water. With a treatment capacity of 1.0 m(3) h(-1), the integrated two-stage EDI process may be able to annually reduce wastewater discharge amounts of 7200 m(3) and sludge disposal values of 12.8 tons, generating annual profit of 208,400 Yuan RMB, comparing favorably with existing chemical precipitation process. These results for the treatment of electroplating rinse wastewater suggest that this integrated two-stage EDI process may be economically beneficial with improved environmental benefits. (C) 2014 Elsevier Ltd. All rights reserved.

Effects of feed water conditions on performance of electrodeionization process for removal of Ni 2+ from dilute solution

Effects of Feed Water Conditions on Performance of Electrodeionization Process for Removal of Ni<sup>2+</sup> from Dilute Solution

Study on the performance of EDI device in dealing with Ni2+solution with dilute departments filled with cation exchange resins

Synchronous concentrating and purifying dilute nickel wastewater by electrodeionization technology

Dilute Nickel Wastewater Treatment by Improved Electrodeionization Technology

Influences of Operation Parameters on Concentration and Separation of Nickel-Containing Solution by Electrodeionization Process

Removal of Nickel Ions from Dilute Heavy Metal Solutions by Electrodeionization Process

Recovery of nickel ions from simulated electroplating rinse water by electrodeionization process.

Impact of resins packed in electrode compartments on concentrating NiSO_4 solution by electrodeionaization(EDI)

Influence Of Packing Form On Performance Of Electrodeionization Process For Removal Ni2+ From Synthetic Wastewater

Recovery of Ni2+ and Pure Water from Electroplating Rinse Wastewater by an Integrated Two-Stage Electrodeionization Process

Removal and recovery of Ni 2 + from electroplating rinse water using electrodeionization reversal

Influence of resin particle size distribution on the performance of electrodeionization process for Ni 2+ removal from synthetic wastewate

SCALING PROBLEM AND PREVENTING MEASURES OF ELECTRODEIONIZATION PROCESS

Recovery of Nickel Ions from Dilute Solutions by Electrodeionization Process

Treatment of dilute Ni2+-containing wastewater by electrodeionization with bipolar membrane：Precipitation

Nickel-Containing Effluent Reclaming by Bipolar Membrane-Electrodeionization Process

Membrane-free Electrodeionization for Purification of Wastewater Containing Low Concentration of Nickel Ions

A Comparative Study Of Nickel(Ii) Removal From Electroplating Wastewater By Pre-Precipitation Combined With Fenton-Precipitation Or Fenton-Like-Precipitation

Influence of Some Parameters on Membrane-Free Electrodeionization for the Purification of Wastewater Containing Nickel Ions

Concentrating Dilute Nickel-Containing Solution by Using Coupled "bipolar Membrane-Electrodeionization"Process