Abstract:Elbows are the type of components widely used in a piping system, and are particularly important from the point of view of structural behaviour. In practice, the existence of cracks in excess of the defect limit cannot be excluded. So it is very important to know the effect of cracks on limit loads of elbows for integrity assessment of the piping system. The existing closed-form limit loads for axial cracked elbows under in-plane bending moment are either too conservative or inadequate, therefore, the present studies focused on limit loads of elbows with axial cracks and the crack configurations were assumed to be constant-depth rectangle, subjected to in plane opening and closing bending moments respectively. The crack-like defects were postulated to be in crown of elbows with different crack sizes. The limit loads and residual strength factors (RSFs) (ML/M0L )of cracked elbows with various ratios of t/rm and relative bending radius R/rm were investigated in detail, by using of three-dimensional (3D) non-linear finite element (FE) analyses, assuming elastic perfectly-plastic material behaviour and taking geometric nonlinearity into account. The non-linear finite element (FE) analyses indicate that under the open/close bending modes, elbows exhibit different behaviour obviously at the elastic plastic states. The results from comprehensive parametric studies indicate that the limit loads of cracked elbows may reduce with the increasing of crack length, and these trends are more serious for long radius elbows. Generally speaking, the thickness-radius ratio t/rm of elbow has insignificant effects on RSFs. Based on extensive limit load numeric data and comprehensive parametric studies, the revised closed form equations for cracked elbows involving effect of tangent pipes, were established. The results can be used for Fitness-For-Service assessment of elbow.

Numerical study of defect free elbows subjected to in-plane bending moment

PLASTIC LIMIT LOAD EQUATIONS OF DEFECT FREE ELBOWS SUBJECTED TO IN-PLANE BENDING MOMENT

Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment

Plastic Collapse Loads for Piping Elbows under In-plane Open/Close Bending Moment

Limit Loads for Cracked Elbows under In-Plane Bending Moment

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

Finite Element Analysis on the Collapse Loads for Cracked Elbows under Internal Pressure

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

COLLAPSE LOADS FOR CRACKED ELBOWS UNDER INTERNAL PRESSURE

Limit loads for part-through surface axially cracked elbows under internal pressure

An Analysis on the Safety Performance of the Combined Fittings of Straight Tees and Long Radius Elbows

Limit and Shakedown Analysis of 45-Degree Piping Elbows under Internal Pressure and In-Plane Bending

Numerical and Experimental Investigation on Limit Load of Elbow with Local Thinning Area

FINITE ELEMENT ANALYSIS OF PLASTIC LIMIT LOADS OF LOCALLY THINNED ELBOWS UNDER INTERNAL PRESSURE AND IN-PLANE BENDING MOMENT

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

PLASTIC LIMIT LOAD ANALYSIS OF T-JUNCTIONS OF PIPING WITH LOCAL WALL-THINNINGS UNDER OUT-OF-PLANE MOMENT

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Ultimate Bearing Capacities of Large Diameter Pipeline Elbows with Ellipsoidal Pits

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Numerical Study on Plastic Strain Distributions and Mechanical Behaviour of a Tube under Bending

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending