Abstract:Nuclear safety is one of the key issues for a nuclear power plant (NPP). The alarm system plays a critical role for the safe and efficient operation of an NPP which is a significant human-machine interface in the main control room. The multi-modular NPPs have multiple reactor modules coupled to one steam turbine. One critical problem for the multi-modular NPP is that the complexity of the alarm system is greatly increased, which threatens the human-factor safety and the operation reliability. On the other hand, the main control room usually suffers from too many alarms to be handled at the same time after the accident, which is difficult for the operator to find out specific initiating event and may cause severe accident. The High Temperature Gas-Cooled Reactor - Pebble bed Module (HTR-PM) which is under construction in Shandong province of China, is a typical multi-modular NPP with two reactor modules coupled to one steam turbine. In this paper, the architecture of the alarm system of HTR-PM is introduced. Different from conventional full-digital alarm system in the NPPs, a set of alarm tiles which are set up at the top of the large display panel are adopted to improve the alarm identification, and the alarm tiles are classified to groups of reactor 1#, conventional island, and reactor 2#, respectively. These alarm tiles cooperates with the alarm indication on the visual display unit to help to locate the accident location as soon as possible. The suppression design in case of alarm overloading are also discussed in this paper. Techniques like the dead band and first alarm indication are adopted in the alarm system of HTR-PM. Two kinds of suppression logics on condition and priority are discussed in the end of this paper. The work showed in this paper can contribute to improve the design of alarm systems in other NPPs, especial the multi-modular NPPs.

Analysis and Improvements of Module Incidental Interference Faults of Water Level Control System Pressurize NPP

Study on Optimization of PID for Feed-water Control System of RB Test in PWR Nuclear Power Station

Analysis of the Influence of Decision Module Performance on Transient Events in Steam Generator Level Control

Safety Analysis on the Volume Increase of Auxiliary Water Tank for Number One and Two Units of Fuqing Nuclear Power Plant

Analysis of Hidden Fault in Digital Instrumentation and Control System of Nuclear Power Plant Based on Environmental Model

Real-time simulations to enhance distributed on-line monitoring and fault detection in Pressurized Water Reactors

A NEW SAFETY ANALYSIS METHOD OF CONTROL ROD EJECTION ACCIDENT IN PWR NPP BASED ON THE FAILURE OF CAUSAL RELATIONSHIP

Research on Nuclear Post-accident Liquid Level Detection Signal Deviation in Nuclear Power Plant Reactor Building

Analysis of abnormal operation of condenser water chamber evacuation system in nuclear power plants

Experimental study on pressure fluctuation in header of nuclear power plant SEC system after long-term pump shutdown

Imperfect Maintenance Scheduling for High Pressure Feedwater Heater System in Nuclear Power Plant

Study on Core Melting Accident Induced by One Stuck-Open Pressurizer Safety Valve

Improvement of RCV Letdown Temperature Control in Daya Bay Nuclear Power Plant

Probability Safety Analysis of Improvement Design of ASG System

Accident Analysis for Inadvertent Opening of Pressurizer Safety Valve in Sanmen NPP

Experimental Study of the Water Film Coverage and the Delay Time on Water Distribution Phenomenon in PCS of CAP1400

Architecture and Suppression Design of Alarm System in HTR-PM

Research and Analysis on the Optimization of the Preventive Disassembly Inspection Intervals of Important Wedge Gate Valves in the Primary Cooling System of CPR1000 Nuclear Power Plant

Improving nuclear power plant safety through independent water storage systems

A Quantitative Evaluation Study on Control Boards of an Actual Chinese NPP

Investigations on seismic performance of nuclear power plants equipped with an optimal BIS-TMDI considering FSI effects