Abstract:As the only one design using water as coolant in Generation IV Nuclear Energy Systems proposed by Generation IV International Forum (OFF), supercritical water cooled reactor (SCWR) has been widely investigated due to its advantages of simplicity, high thermal efficiency, good economy and safety. The Sino-Euro corporation project Supercritical Water Reactor-Fuel Qualification Test (SCWR-FQT) is proposed to analyze and verify a supercritical water-cooled experiment loop containing a small scale fuel assembly and provide support to this loop's design and license application. To solve the problems above, this paper will carry out the preliminary safety research for the SCWR-FQT facility. Several thermal-hydraulic codes (including CFD code, subchannel code, system code) are selected to perform the safety analysis in the facility. COBRA and ATHLET have been modified by implementing the heat transfer model, turbulent mixing and friction models which are applied to supercritical water cooled reactors into the previous code. To determine the detailed thermal-hydraulic behavior in the bundle region at some transient condition, the multi-scale coupled code has also been developed by transferring the pressure at the core outlet, coolant temperature at the core inlet, coolant mass flow rate at the core inlet, heat generated in the active core and pressure friction coefficient of SCWR-FQT. The results indicate that the new developed code has good feasibility to transient analysis of supercritical water-cooled test and fuel bundles can be cooled effectively with safety measures in accidental conditions. The CFD results show that wire-wrap has large influence on heat transfer. The subchannel code presents that the cladding temperature will be highest when blockage occurs in the corner subchannel. Meanwhile, the coupled results show that the coupled code can predict the accurate accident procedure and detailed parameters distribution.

Effects of Circumferential Heat Conduction in Fuel Rods on Sub-channel Analysis for SCWR Core

Core and Sub-Channel Evaluation of A Thermal Scwr

Sub-Channel Analysis Of Scwr Assembly With Double-Row Rods

Coupled Neutronics and Thermal–Hydraulics Analysis of Annular Fuel Assembly for SCWR

Analysis For Inverse Flow In Moderator Channels Of Supercritical Water Cooled Reactor

Numerical Simulation and Analysis on Thermal-hydraulic Behavior of Fuel Assembly for Sodium-cooled Fast Reactor

Analysis of the Sub-Channel of SCWR Two-Row Fuel Assembly

Cfd Analysis of Heat Transfer in Subchannels of A Super Fast Reactor

Heat Transfer Effectiveness for Cooling of Canadian SCWR Fuel Assembly under the LOCA/LOECC Scenario

Coupling analysis on a new SCWR core design

Steady-state Thermal-Hydraulic Analysis of SCWR Assembly

Thermal-hydraulic analysis of flow blockage in a supercritical water-cooled fuel bundle with sub-channel code

Sub-channel Analysis of CANDU–SCWR and Review of Heat-Transfer Correlations

Thermal-hydraulic and Neutron-Physical Characteristics of a New SCWR Fuel Assembly

Multi-layer Fuel Assembly Design Proposal for Supercritical Water Cooled Reactor

Subchannel Thermal-Hydraulic Analysis of the Fuel Assembly for Liquid Sodium Cooled Fast Reactor

Coupled neutronics/thermal–hydraulics analysis of CANDU–SCWR fuel channel

Multi-scale Thermal-Hydraulics Analysis on SCWR Fuel Qualification Test Loop

Neutron-Kinetics/Thermal-Hydraulics Performance Analysis of Fast Zone Assembly in Supercritical Water Reactor Mixed Core

Cfd Analyses in Tight-Lattice Subchannels and Seven-Rod Bundle Geometries of A Super Fast Reactor

Stability Analysis of A Square Rod Bundle Sub-Channel in Supercritical Water Reactor