Abstract:A thorough understanding of the reactor core thermal hydraulic behavior is essential for the design and safety analysis of Sodium-cooled Fast Reactors (SFR). Due to the application of hexagonal subassembly, the core thermal hydraulic behavior is significantly affected by the flow field within the subassemblies, the inter-wrapper region and the hot pool. Analysis of the core thermal hydraulic behavior requires a model coupling the three regions mentioned above, which has been identified as one of the thermal hydraulic challenges in SFR. In the present study, a 3D model that covers the three regions was developed for the core of the China Experimental Fast Reactor (CEFR) with the Computational Fluid Dynamic (CFD) code, Fluent. The inter-wrapper region and the hot pool were modeled in detail, while the subassemblies were modeled with a special porous medium model. The core thermal hydraulics behavior under steady state was studied, more specifically, information for the flow field distribution at the core outlet, the inter-wrapper flow and the duct wall temperature distribution was obtained. Under steady state, liquid sodium in the inter-wrapper region is supplied by the inner region of the hot pool. And it enters the inter-wrapper region from the core outer region and returns back to the hot pool inner region from the core central region. The inter-wrapper flow is cooled by non-fuel subassemblies and heated up by fuel subassemblies. For non-fuel subassembly, the ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies could reaches 96%; for fuel subassemblies, the maximum ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies is 2.45%. Significant temperature gradients have been observed on the duct wall, with maximum values of 156.69 K/m in the vertical direction and 2,196.00 K/m in the circumferential direction. The largest temperature gradient appears on the duct of subassemblies adjacent to the transition region of fuel subassemblies and non-fuel subassemblies.

Neutron-Kinetics/Thermal-Hydraulics Performance Analysis of Fast Zone Assembly in Supercritical Water Reactor Mixed Core

Optimization of a Fuel Assembly for Supercritical Water-Cooled Reactor CSR1000

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

Preliminary study on physical characteristics of single‐pass super‐critical water‐cooled reactor core

Study on the Layout of the SCWR Fuel Assembly

Numerical Simulation and Analysis on Thermal-hydraulic Behavior of Fuel Assembly for Sodium-cooled Fast Reactor

Neutronic and Thermal-Fluidic Analyses for an Additive Manufactured Reactor with SiC Matrix and TRISO Particle Fuel

Neutronic analysis of fuel assembly loading patterns in small integrated pressurized water reactor core and fuel shifting strategy concept design

Research on CFD Calculation and Analysis Technology of Porous Media in Sodium Cooled Fast Reactor Core

Preliminary Core Design of the Long Life S-CO2 Cooled Fast Reactor With 300WMth

A Simplified Supercritical Fast Reactor with Thorium Fuel

A multi-group Monte Carlo core analysis method and its application in SCWR design

Numerical investigation on the core thermal hydraulic behavior of pool-type sodium-cooled fast reactor (SFR)

Thermal-Hydraulic Design of High-Power-Density Annular Fuel in PWRs

Lead-Cooled Fast Reactor Annular UN Fuel Design and Development of Performance Analysis Program

Coupled Monte Carlo and Thermal-Hydraulics Modeling for the Three-Dimensional Steady-State Analysis of the Xi'an Pulsed Reactor

Conceptual Design and Feasibility Analysis of a Modular Supercritical CO2 Fast Reactor Core

Study On Neutronics And Fuel Cycle Of Fusion-Fission Hybrid Reactor

Neutronics and Thermal Hydraulics Analysis of a Conceptual Ultra-High Temperature MHD Cermet Fuel Core for Nuclear Electric Propulsion

Core Neutron Space-time Kinetics of High Temperature Gas Cooled Reactor

Thermal Hydraulic Design and Evaluation of the Solid Microencapsulated Fuel in Light Water Reactors