Abstract:The SCWR core concept SCWR-M is proposed based on a mixed spectrum and consists of a thermal zone and a fast zone. This core design combines the merits of both thermal and fast SCWR cores, and minimizes their shortcomings. In the thermal zone co-current flow mode is applied with an exit temperature slightly over the pseudo-critical point. The downward flow in the thermal fuel assembly will provide an effective cooling of the fuel rods. In the forthcoming fast zone, a sufficiently large negative coolant void reactivity coefficient and high conversion ratio can be achieved by the axial multi-layer arrangement of fuel rods. Due to the high coolant inlet temperature over the pseudo-critical point, the heat transfer deterioration phenomenon will be eliminated in this fast spectrum zone. And the low water density in the fast zone enables a hard neutron spectrum, also with a wide lattice structure, which minimizes the effect of non-uniformity of the circumferential heat transfer and reduces the cladding peak temperature.The performance of the proposed core, including the neutron-physical and thermal-hydraulic behavior in sub-channel scale, is investigated with coupled neutron-physical/thermal-hydraulic simulation tools, which at the same time enables multi-scale analysis. During the coupling procedure, the thermal-hydraulic behavior is analyzed using a multi-channel code and the neutron-physical performance is computed with a 3-D diffusion code. Based on the core results, the pin-power reconstruction is carried out for each fuel assembly to predict the local pin-power distribution. Moreover, the sub-channel calculation is performed to obtain the thermal-hydraulic parameters for each sub-channel and fuel rod. Based on the coupled analysis, measures to improve the performance of the SCWR-M core design are proposed and evaluated in this paper.The results achieved in this paper have shown that the mixed spectrum SCWR core concept (SCWR-M) is feasible and promising. One reference SCWR-M design is proposed for future analysis. (c) 2010 Elsevier Ltd. All rights reserved.

A multi-group Monte Carlo core analysis method and its application in SCWR design

Core and Sub-Channel Analysis of SCWR with Mixed Spectrum Core

Coupling analysis on a new SCWR core design

Core Design Study on CANDU-SCWR with 3D Neutronics/thermal-Hydraulics Coupling

Coupled Thermal-Hydraulics and Neutron-Physics Analysis of SCWR with Mixed Spectrum Core

A Study on Scwr Core Design and Fuel Management

Generating multi-group cross-sections using continuous-energy Monte Carlo method for fast reactor analysis

Study and Preliminary Analysis of Core and Main System Design of SCWR

Coupled Analysis of SCWR With Annular Fuel Assembly

Core and Sub-Channel Evaluation of A Thermal Scwr

Coupled analysis and improvements for Canadian-SCWR core design

Coupled Neutronics and Thermal–Hydraulics Analysis of Annular Fuel Assembly for SCWR

Subchannel analysis on CGNPC SCWR

Conceptual Design of Candu-Scwr with Thermal-Hydraulics Coupling

Study on Calculation Difference of the SCWR Core Steady State Analysis Code

ICONE19-43235 Development of a Monte Carlo Multi-group Constants Generation Code

Research on Neutronics Calculation Method for SCWR with Annular Fuel

Preliminary study on physical characteristics of single‐pass super‐critical water‐cooled reactor core

Pre-Conceptual Core Design of Scwr with Annular Fuel Rods

Improved Core Design of SCWR with Double-Row-Rod Assembly