Abstract:The SCWR core concept SCWR-M is proposed based on a mixed spectrum and consists of a thermal zone and a fast zone. This core design combines the merits of both thermal and fast SCWR cores, and minimizes their shortcomings. In the thermal zone co-current flow mode is applied with an exit temperature slightly over the pseudo-critical point. The downward flow in the thermal fuel assembly will provide an effective cooling of the fuel rods. In the forthcoming fast zone, a sufficiently large negative coolant void reactivity coefficient and high conversion ratio can be achieved by the axial multi-layer arrangement of fuel rods. Due to the high coolant inlet temperature over the pseudo-critical point, the heat transfer deterioration phenomenon will be eliminated in this fast spectrum zone. And the low water density in the fast zone enables a hard neutron spectrum, also with a wide lattice structure, which minimizes the effect of non-uniformity of the circumferential heat transfer and reduces the cladding peak temperature.The performance of the proposed core, including the neutron-physical and thermal-hydraulic behavior in sub-channel scale, is investigated with coupled neutron-physical/thermal-hydraulic simulation tools, which at the same time enables multi-scale analysis. During the coupling procedure, the thermal-hydraulic behavior is analyzed using a multi-channel code and the neutron-physical performance is computed with a 3-D diffusion code. Based on the core results, the pin-power reconstruction is carried out for each fuel assembly to predict the local pin-power distribution. Moreover, the sub-channel calculation is performed to obtain the thermal-hydraulic parameters for each sub-channel and fuel rod. Based on the coupled analysis, measures to improve the performance of the SCWR-M core design are proposed and evaluated in this paper.The results achieved in this paper have shown that the mixed spectrum SCWR core concept (SCWR-M) is feasible and promising. One reference SCWR-M design is proposed for future analysis. (c) 2010 Elsevier Ltd. All rights reserved.

Core and Sub-Channel Evaluation of A Thermal Scwr

Coupling analysis on a new SCWR core design

Thermal-hydraulic and Neutron-Physical Characteristics of a New SCWR Fuel Assembly

Core and Sub-Channel Analysis of SCWR with Mixed Spectrum Core

Sub-Channel Analysis Of Scwr Assembly With Double-Row Rods

Analysis of the Sub-Channel of SCWR Two-Row Fuel Assembly

Coupled Neutronics and Thermal–Hydraulics Analysis of Annular Fuel Assembly for SCWR

Multi-layer Fuel Assembly Design Proposal for Supercritical Water Cooled Reactor

Coupled Analysis of SCWR With Annular Fuel Assembly

Steady-state Thermal-Hydraulic Analysis of SCWR Assembly

Effects of Circumferential Heat Conduction in Fuel Rods on Sub-channel Analysis for SCWR Core

A Study on Scwr Core Design and Fuel Management

Coupled Thermal-Hydraulics and Neutron-Physics Analysis of SCWR with Mixed Spectrum Core

Core Design Study on CANDU-SCWR with 3D Neutronics/thermal-Hydraulics Coupling

Development of a Subchannel Analysis Code for SFR Wire-Wrapped Fuel Assemblies

Coupled neutronics/thermal–hydraulics analysis of CANDU–SCWR fuel channel

Preliminary study on physical characteristics of single‐pass super‐critical water‐cooled reactor core

Subchannel Thermal-Hydraulic Analysis of the Fuel Assembly for Liquid Sodium Cooled Fast Reactor

Pre-Conceptual Core Design of Scwr with Annular Fuel Rods

Study on Neutronic Characteristics and Neutronic-Thermohydraulic Coupling Behavior of SCWR with Thorium-Based Fuel

Numerical Investigation of Flow and Heat Transfer in the Sub-Channel of an SCWR Core with Split-Vanes