Abstract:A thorough understanding of the reactor core thermal hydraulic behavior is essential for the design and safety analysis of Sodium-cooled Fast Reactors (SFR). Due to the application of hexagonal subassembly, the core thermal hydraulic behavior is significantly affected by the flow field within the subassemblies, the inter-wrapper region and the hot pool. Analysis of the core thermal hydraulic behavior requires a model coupling the three regions mentioned above, which has been identified as one of the thermal hydraulic challenges in SFR. In the present study, a 3D model that covers the three regions was developed for the core of the China Experimental Fast Reactor (CEFR) with the Computational Fluid Dynamic (CFD) code, Fluent. The inter-wrapper region and the hot pool were modeled in detail, while the subassemblies were modeled with a special porous medium model. The core thermal hydraulics behavior under steady state was studied, more specifically, information for the flow field distribution at the core outlet, the inter-wrapper flow and the duct wall temperature distribution was obtained. Under steady state, liquid sodium in the inter-wrapper region is supplied by the inner region of the hot pool. And it enters the inter-wrapper region from the core outer region and returns back to the hot pool inner region from the core central region. The inter-wrapper flow is cooled by non-fuel subassemblies and heated up by fuel subassemblies. For non-fuel subassembly, the ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies could reaches 96%; for fuel subassemblies, the maximum ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies is 2.45%. Significant temperature gradients have been observed on the duct wall, with maximum values of 156.69 K/m in the vertical direction and 2,196.00 K/m in the circumferential direction. The largest temperature gradient appears on the duct of subassemblies adjacent to the transition region of fuel subassemblies and non-fuel subassemblies.

Development of a Subchannel Analysis Code for SFR Wire-Wrapped Fuel Assemblies

Subchannel Thermal-Hydraulic Analysis of the Fuel Assembly for Liquid Sodium Cooled Fast Reactor

A Subchannel Analysis Code SACOS-Na for Sodium-Cooled Fast Reactor

Improvement and Validation of a Sub‐channel Analysis Code for a Lead‐cooled Reactor with Wire Spacers

CFD Simulation of a 61-pin Wire-wrapped Fuel Subassembly for Sodium Cooled Fast Reactor

Development and Application of a Refined Subchannel Analysis Code for Lead-Based Wire-Wrapped Bundles

Numerical investigation on the core thermal hydraulic behavior of pool-type sodium-cooled fast reactor (SFR)

Development a Methodology for Evaluating Inter‐assembly Heat Transfer Effect Through Reactor Core in System Safety Analysis of Sodium‐cooled Fast Reactor

Numerical Investigation for the Heat Transfer Mechanisms Between Subchannels of Bar Rod Bundles Cooled by Liquid Sodium

CFD Investigation on Thermal-Hydraulic Behaviors of a Wire-Wrapped Fuel Subassembly for Sodium-Cooled Fast Reactor

Multi-scale Thermal-Hydraulics Analysis on SCWR Fuel Qualification Test Loop

Core and Sub-Channel Evaluation of A Thermal Scwr

Development of modular dynamic code for steam power conversion system in sodium-cooled fast reactor

Development of sub-channel analysis code for CANDU-SCWR

Analysis Code Development for the Direct Reactor Auxiliary Cooling System of the Pool-Type Sodium-Cooled Fast Reactor

Development and Application of Sub-channel Analysis Code Based on SCWR Core

Development and Validation of Subchannel Code SUBSC

Sub-Channel Analysis Of Scwr Assembly With Double-Row Rods

Numerical Simulation and Analysis on Thermal-hydraulic Behavior of Fuel Assembly for Sodium-cooled Fast Reactor

Thermal-hydraulics Analysis of Flow Blockage Events for Fuel Assembly in a Sodium-Cooled Fast Reactor

Development of a Subchannel Analysis Code and Its Application to Annular Fuel Assemblies