Abstract:Carbon nanotubes (CNTs) have received widespread attention in the fields of emission displays, high-strength composites, fuel cells, and lithium-ions batteries owing to their unique chemical and physical properties. Recent reports have demonstrated that CNTs are also promising heterogeneous catalysts in the oxidative dehydrogenation (ODH) reactions of n-butane, 1-butene, ethylbenzene, propane, and ethane. Their outstanding catalytic performance makes CNTs candidates for replacing traditional-metal/metal-oxide catalysts in sustainable chemistry. However, commercial CNTs are typically produced in their powdered form by using the chemical vapor decomposition (CVD) method. These CNT powders tend to agglomerate and are difficult to filter in slurry-phase operation. In addition, owing to a high pressure drop, CNT powders cannot be directly used in fixed-bed reactors. Therefore, it is necessary to form CNTs into larger objects. The method of the compaction of powdered CNTs often inhibits the access of reactants to its active sites and may destroy individual CNTs during the compacting process. The immobilization of CNTs onto certain supports is a more practical approach to solving these problems. Some efforts have been made to grow CNTs or carbon nanofibers (CNFs) on carbon felt, activated carbon, and Lava supports for ODH reactions and CNFs have been formed on porous supports (carbon foams, metal foams, and porous ceramic materials) for catalytic applications. Silicon carbide (SiC) foam possesses high thermal conductivity and mechanical stability and it can be used as a support to immobilize catalysts, which could overcome the disadvantage of the pressure drop in fix-bed reactors. Recently, zeolites have been coated onto SiC substrates, thereby forming zeolite/SiC catalysts. Nitrogen-doped CNTs that are grown on SiC foam show high catalytic activity in the selective oxidation of H2S. [13] For the industrial production of alkenes with CNT catalysts, the growth of CNTs on SiC foam as a monolith catalyst is desirable and the strength of the interactions between the CNTs and the support also needs to be considered. Herein, we report a new method for immobilizing CNTs onto SiC foam as a CNT/SiC monolith and its application in ODH reactions. Structural characterization of the as-prepared monolith shows that the CNTs completely and firmly cover the surface of the SiC foam. Moreover, the CNT/SiC monolith exhibits remarkable catalytic performance and stability in the ODH reaction of 1-butene into butadiene. SiC foam was prepared by a combination of macromolecule pyrogenation with chemical bonding. The foam plastic was soaked in a mixed slurry of SiC powder, resin, EtOH, and silicon powder. After drying and solidification, the foam composite was pyrolyzed and sintered under an argon atmosphere, thereby affording the SiC foam. The preparation process of the CNT/SiC monolith is shown in Scheme 1. Firstly, the SiC foam was immersed in an aqueous solution of Fe(NO3)3, Mg(NO3)2,

Synthesis Of Carbon Nanotubes By Fine Ni Particles In Ni3al Foam

A Facile Synthesis of C-N Hollow Nanotubes As High Electroactivity Catalysts of Oxygen Reduction Reaction Derived from Dicyandiamide

Mesoporous Carbon Materials with Ultra‐Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Effect of adding nickel to iron–alumina catalysts on the morphology of as-grown carbon nanotubes

Application of Carbon Nanotube Supported Nickel/aluminum Mixed Oxide in the Synthesis of Carbon Nanotubes

Synthesis of carbon nanotubes with Ni/CNTs catalyst

Influence of Synthesis Process on Preparation and Properties of Ni/CNT Catalyst

Synthesis of Thin-Walled Carbon Nanotubes from Methane by Changing the Ni/Mo Ratio in a Ni/Mo/MgO Catalyst

One-step preparation of a N-CNTs@Ni foam electrode material with the co-production of H2 by catalytic reforming of N-containing compound of biomass tar

Synthesis,Characterization and Performance of Helical Carbon Nanotubes

Synthesis Of Carbon Nanotubes By Selective Reduction Of Mixed Oxides

Effects of Different Ni-Fe/Ni Foam Catalysts on In Situ Preparation of CNTs@Ni Foam Electrode Materials and H 2 during Steam Reforming of Pyrrole

Synthesis of carbon nanofibers by CVD as a catalyst support material using atomically ordered Ni3C nanoparticles

Application of NiO deposited by atomic layer deposition for carbon nanotubes catalytic growth

Synthesis of nanostructured carbon through ionothermal carbonization of common organic solvents and solutions.

Synthesis Of Carbon Nanotubes By Catalytic Decomposition Of Methane Using Lani5 Hydrogen Storage Alloy As A Catalyst

Synthesis and Characterization of Graphite Nanofibers Deposited on Nickel Foams

Agglomerated CNTs Synthesized in a Fluidized Bed Reactor: Agglomerate Structure and Formation Mechanism

Immobilizing Carbon Nanotubes on SiC Foam As a Monolith Catalyst for Oxidative Dehydrogenation Reactions

Carbon nanotubes production from catalytic pyrolysis of polyethylene over nickel-based catalysts: The influence of support materials

Synthesis of Carbon Nanotubes by Catalytic Chemical Vapor Deposition Using Hydrogen Storage Alloy As A Catalyst