Abstract:Environmental concern about automotive shredder residue (ASR) has increased in recent years due to its harmful content of heavy metals. Although several approaches of ASR management have been suggested, these approaches remain commercially unproven. This study presents an alternative approach for ASR management where advanced materials can be generated as a by-product. In this approach, titanium nitride (TiN) has been thermally synthesized by nitriding pressed mixture of automotive shredder residue (ASR) and titanium oxide (TiO2). Interactions between TiO2 and ASR at non-isothermal conditions were primarily investigated using thermogravimetric analysis (TGA) and differential scanning calorimetry. Results indicated that TiO2 influences and catalyses degradation reactions of ASR, and the temperature, at which reduction starts, was determined around 980 °C. The interaction between TiO2 and ASR at isothermal conditions in the temperature range between 1200 and 1550 °C was also studied. The pressed mixture of both materials resulted in titanium nitride (TiN) ceramic at all given temperatures. Formation kinetics were extracted using several models for product layer diffusion-controlled solid-solid and solid-fluid reactions. The effect of reactants ratio and temperature on the degree of conversion and morphology was investigated. The effect of reactants ratio was found to have considerable effect on the morphology of the resulting material, while temperature had a lesser impact. Several unique structures of TiN (porous nanostructured, polycrystalline, micro-spherical and nano-sized structures) were obtained by simply tuning the ratio of TiO2 to ASR, and a product with appreciable TiN content of around 85% was achieved after only one hour nitridation at 1550 °C.

A Low Temperature Synthetic Route to Nanocrystalline Tin

Low-Temperature Synthesis of Nanocrystalline Titanium Nitride via a Benzene-Thermal Route

A Simple Route to Prepare Nanocrystalline Titanium Carbonitride

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

Low-temperature Synthesis of TiB2 Nanocrystals Using TiO2 ,LiBH4 and Mg

Formation Of Nanocrystalline Tin Film By Ion-Beam-Enhanced Deposition

The co-reduction route to TiC nanocrystallites at low temperature

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Preparation of nano-TiN powders by Ni-catalysed carbothermal reduction nitridation

Low-Temperature Synthesis of Titanium Oxynitride Nanoparticles

Sol-Gel Preparation of N-doped TiO2 Nanocrystalline at Low Temperature

Synthesis of Uniform Titanium Nitride Nanocrystalline Powders Via a Reduction–Hydrogenation–Dehydrogenation–Nitridation Route

Synthesis of Nanopowders of Titanium Nitride by In-Situ Nitridation of Titanium Oxide

Efficient and cost-effective method to synthesize highly purified Ti4AlN3 and Ti2AlN

A New Reduction-Carburization Route to Nanocrystalline Tic

Molten Salt‐Assisted Synthesis of Titanium Nitride

Efficient and cost-effective method to synthesize highly purified Ti<sub>4</sub>AlN<sub>3</sub> and Ti<sub>2</sub>AlN

Waste Conversion into High-Value Ceramics: Carbothermal Nitridation Synthesis of Titanium Nitride Nanoparticles Using Automotive Shredder Waste.

Synthesis of titanium nitride via hybrid nanocomposites based on mesoporous TiO2/acrylonitrile

Dynamically Controlled Formation of Tin by Combustion of Ti in Air

Titania Nanowires Synthesized by Thermal Oxidation of Ti Plates in Vacuum