Abstract:The improvement of mechanical properties of high-density polyethylene (HDPE) and polypropylene (PP) blends was studied by controlling the phase compatibility versus phase separation. In the original injection molding processes,super mechanical properties of blend specimens-have not been got easily. Researches have been carried out in injection molding with high shear injection conditions. It has been pointed out that the compatibility of blends will increase under the strong shear in injection processes due to the raise of LCST curve. After the melt is injected into the cold mold, its temperature and compatibility decrease simultaneously, phase separation takes place and becomes frozen in the specimen. High mechanical properties will be got when the phase separation develope to some extent, but it is difficult to control the phase compatibility and separation. The special method of oscillating packing injection molding under low pressure provides a condition to control the phase separation degree. Because the phase morphology and crystal morphology of HDPE/PP blends compete with each other, it is difficult to control the micro-phase separation. In this paper, the fine structure combined with the micro-phase separation and orientation were controlled by using that special injection method and high strength and high toughness blends were obtained. DSC and WAXD results indicate that the improvement of tensile strength is dependent on the number of shish-kebab crystals and the degree of macromolecule orientation caused by the oscillating packing injection molding. SEM results indicate that the impact strength is dependent on the degree of macro- and micro-phase separation. The high tensile strength 97.1MPa and high toughness 45.5kJ/m(2) of HDPE/PP blends were achieved when the PP content in the blends was 8 % and 20 %, respectively. Which are 4.3 times and 9.5 times as high as the corresponding values of their static specimens respectively. The future work will be carried out to investigate the phase morphology and crystal morphology as well as the possibility of cocrystallization of PP and HDPE under oscillating packing injection conditions.

Study on the morphology and properties of PP/HDPE blend prepared by vibration injection molding

Study on Morphology Structure and Properties of PP/LLDPE Blend in Vibration Injection Molding

Effect of Vibration Injection Molding on Crystal Morphology and Properties of PP/HDPE Blend

The morphology and property of HDPE in the presence of oscillation pressure and poly(ethylene terephthalate)

EFFECTS OF VIBRATION INJECTION ON MECHANICAL PROPERTIES AND MORPHOLOGY STRUCTURE OF IPP/HDPE COMPOSITES

Improvement of Mechanical Properties of HDPE Injection Samples by Vibration

Effect of Melt Vibration on Structure and Mechanical Properties of HDPE/nano-CaCO 3 Blend

Vibration-Induced Self-Reinforcement of Injection Molding Samples of High-Density Polyethylene

Effect of vibration parameters in plasticizing process on properties of polypropylene by dynamic injection molding

Mechanical properties and structure of high-density polyethylene samples prepared by injection molding with low-frequency vibration

Mechanical Properties of Injection Samples of Isotactic Polypropylene Improved by Vibration

Mechanical Property, Thermal Property and Crystal Structure of Isotactic Polypropylene Samples Prepared by Vibration Injection Molding

Simultaneously achieving self-toughening and self-reinforcing of polyethylene on an industrial scale using volume-pulsation injection molding

THE EFFECT OF LOW FREQUENCY VIBRATION ON PROPERTIES OF Ipp MOLDING SAMPLES

Simultaneously toughening and reinforcing high-density polyethylene via an industrial volume-pulsatile injection molding machine and Poly(ethylene terephthalate)

The Morphology Control and Mechanical Properties of High Density Polyethylene and Polypropylene Blend under Oscillating Shear Stress Field

Effect of vibration extrusion on mechanical properties and structure of HDPE/OMMT nanocomposites

Effect of Vibration Injection Molding on Crystal Morphology and Mechanical Properties of IPP

The High Mechanical Properties and Micro-Phase Separation of High Density Polyethylene and Polypropylene Blends

Tensile Properties and Condensed Structure of Vibration Extruded HDPE Blends

The creep behavior and mechanical properties of polypropylene (PP) in mechanical vibration injection molding under low frequency vibration field