Investigating the Effect of Bias Voltage on the Microstructural Thermal Stability and Tribological Performance of N-doped Hydrogenated Diamond-Like Carbon Coatings
Jihua Peng,Jinghai Huang,Yinglong Peng,Yang Xiao,Manzhong Yang
DOI: https://doi.org/10.1016/j.surfcoat.2022.129064
IF: 4.865
2022-01-01
Surface and Coatings Technology
Abstract:Here, N-doped hydrogenated diamond-like carbon (a-C:H:N) coatings were deposited onto 316 L stainless steel and silicon wafer substrates by applying plasma-enhanced chemical vapor deposition at different bias voltages (Vb). The coatings were annealed at 25-590 degrees C for 4 h. The structure and chemical bonding of the coatings were characterized using scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The residual stress, surface hardness, and tribo-logical performance were investigated by using the Stoney method, a nanoindenter, and sliding against alumina. The fraction of the constituent bonds in the coating was controlled depending on Vb. The evolution of these bonds during annealing determined the thermal and mechanical performance of the a-C:H:N coatings, particu-larly the CHn group, sp2C bonds, and CO bonds (C-O and C--O). As Vb increased, the fraction of CHn groups, CO bonds, and CN bonds decreased, whereas that of sp2C increased. When annealed at above 430 degrees C, the breakage of the CHn groups and C--N bonds accelerated the sp3 -> sp2 transformation. The coating prepared at-500 V exhibited the highest hardness of 22.5 GPa and low residual stress of-0.57 GPa; after annealing at 590 degrees C for 4 h, a hardness of 15 GPa was maintained. The wear resistance was positively related to the surface hardness of the coatings, whereas the coefficient of friction was responsible for the fraction of sp3CHn, CO bonds, and sp2C bonds. The wear resistance of the coating deposited at-500 V was double that of the coating deposited at-740 V.