Abstract:Refractory high-entropy alloys (RHEAs) composed of Ti, Zr, Hf, and Nb have emerged as promising materials for high-temperature aerospace applications due to their exceptional balance of strength and toughness, coupled with a reduced density and softening resistance. This study delves into the influence of alloy composition on the mechanical properties, a pivotal aspect in the design of RHEAs. We investigate a series of Ti48-xZrxHf26Nb26 (x = 14, 18, 22, 26, 30, 34) alloys, prepared through suction casting and homogenization treatments. The phases, microstructure, and fracture morphology of these alloys are analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and electron backscattered diffraction (EBSD), subsequent tensile tests provide insights into the strength and elongation characteristics of alloys. The homogenized alloys consistently exhibit one BCC phase with equiaxed grains, whereas the fracture mode shifts from intergranular to transgranular, and return to intergranular as the Zr content increases. Experimental results reveal an asymmetry mechanical behavior, alloys with higher Ti content display superior toughness (elongation 17.83% for Ti = 34 at.%) compared to those with higher Zr content (elongation 16.05% for Zr = 34 at.%). Among them, the Ti22Zr26Hf26Nb26 alloy achieves the peak tensile strength of 695.25 MPa, indicating an inverse relationship between strength and toughness. Solid-solution strengthening and chemical short-range orderings emerge as the predominant contributors to the overall strength of the TiZrHfNb alloys. To gain a deeper understanding of the mechanical behavior at the atomic scale, we performed first-principles calculations to investigate the elastic properties and charge density of Ti48-xZrxHf26Nb26 alloys in the BCC structure. These calculations shed light on the underlying mechanisms governing the strength and toughness behavior. The present work offers valuable insights into the design of mechanical properties of TiZrHfNb RHEAs, serving as a paradigm for future materials development in this field.

Effect of substrate bias on the microstructure and mechanical and tribological properties of ZrNbTiMo refractory high entropy alloy film

Effect of Substrate Bias on the Microstructure and Properties of Non-Equimolar (alcrsitizr)n Films with Different Cr/Zr Ratios Deposited Using Reactive Direct Current Magnetron Sputtering

Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power

Effect of bias voltages on microstructure and properties of (TiVCrNbSiTaBY)N high entropy alloy nitride coatings deposited by RF magnetron sputtering

Effect of substrate bias on structure and properties of (AlTiCrZrNb)N high-entropy alloy nitride coatings through arc ion plating

Effect of Substrate Bias on the Structure and Properties of Multi-Element (alcrtatizr)n Coatings

Improvement of high entropy alloy nitride coatings (AlCrNbSiTiMo)N on mechanical and high temperature tribological properties by tuning substrate bias

Effect of Nitrogen Content and Substrate Bias on Mechanical and Corrosion Properties of High-Entropy Films (Alcrsitizr)100−xnx

Effects of Substrate Bias on Structure and Mechanical Properties of (alcrnbsitiv)n Coatings

Influence of Substrate Bias on Properties of TiN Films with X-ray Photoelectron Spectroscopy and Atomic Force Microscopy Studies

Microstructure evolution and mechanical properties of refractory high-entropy alloy nitride film

Effect of sputtering power and substrate bias on microstructure, mechanical properties and corrosion behavior of CoCrFeMnNi high entropy alloy thin films deposited by magnetron sputtering method

Effects of substrate temperature and bias voltage on mechanical and tribological properties of cosputtered (TiZrHfTa)N x films

Effects of substrate bias on the structure and mechanical properties of (Al 1.5 CrNb 0.5 Si 0.5 Ti)N x coatings

Effect of interstitial oxygen /nitrogen on mechanical and wear properties of TiZrHfNb refractory high-entropy alloy

Effect of bias voltage on the erosion performance of TiAlSiN coatings on TC6 substrate by high power impulse magnetron sputtering

Revealing the Mechanical Behavior of Ti Zr Hf Nb High-Entropy Alloy Through Zirconium Content Variations

Microstructure, mechanical properties, electrical resistivity, and corrosion behavior of (AlCr) x (HfMoNbZr) 1-x films

The Effect of Gradient Bias Design on Electrochemistry and Tribology Behaviors of PVD CrN Film in a Simulative Marine Environment

Revealing the mechanical behavior of Ti48-xZrxHf26Nb26 high-entropy alloy through zirconium content variations

Effect of Zr on the as-cast microstructure and mechanical properties of lightweight Ti2VNbMoZrx refractory high-entropy alloys