Abstract:High efficiency, large capacity, and low energy consumption have become an important challenge in performances of post-combustion carbon dioxide (CO2) capture and regeneration. Blended absorbents have shown great potential but their process simulation, modeling, and optimization have not been known definitively. This work developed the blended aqueous absorbents based on piperazine (PZ) activators: PZ-activated methyldiethanolamine (MDEA), potassium carbonate solution (K2CO3), and aqueous ammonia (NH3H2O) to improve their techno-economic performances. The whole process simulation was conducted using a validated rate-based model under given a CO2 capture efficiency of 85%. In this process, the key factors including the molar concentration of the absorbent, PZ molar ratio, CO2 load of lean liquid, lean-liquid temperature, flue-gas temperature, and rich-liquid temperature, were employed for the design of experiment using response surface methodology. A series of nonlinear regression equations were developed using the flow rate of absorbents, the reboiler heat duty (in the units of gigajoules per ton of CO2), and the cooling-water flow rate as the multi-objective function. Subsequently, the optimal Pareto solution set and compromise solutions were determined using the multi-objective genetic algorithm and finally, their performances were assessed using the fuzzy close-degree algorithm. It was found that the optimal operating parameters can be determined effectively according to the proposed approach. For each PZ-activated blended absorbents, the trade-off effect exists between absorbent flow rate, reboiler heat duty, and cooling water consumption. The absorbents having optimal techno-economic performance were recommended to be PZ-activated MDEA, followed by PZ-activated K2CO3 and PZ-activated NH3H2O when considering the regeneration energy consumption. The results may provide a positive reference for process design and optimization of the industrial post-combustion CO2 capture system.

Performance evaluation on complex absorbents for CO2 capture

Deciphering the Transfer Mechanisms for CO2 Absorption into Binary Blended Solutions

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

[Experimental Study on CO2 Absorption by Aqueous Ammonia-Based Blended Absorbent].

Process simulation, optimization and assessment of post-combustion carbon dioxide capture with piperazine-activated blended absorbents

Design and performance evaluation of low-volatility and low-viscosity absorbents for CO2 capture

Experimental Studies and Rate-Based Simulations of CO2 Absorption with Aqueous Ammonia and Piperazine Blended Solutions

Influence of Absorbent Composition and Operating Parameters on CO2 Removal Efficiency Using Aqueous Blends of 1-Dimethylamino-2-propanol in Tray Column

Investigation on CO2 Capture Performance of Low-Viscosity Diamine Non-Aqueous Absorbents with N-methyldiethanolamine Regulation

Study of New Blended Chemical Absorbents to Absorb CO2

Preliminary Mass Transfer Performance of CO2 Absorption into AMP-PZ-MEA Ternary Amines

Reaction kinetics of CO2 capture into AMP/PZ/DME solid-liquid biphasic solvent

Optimization of Blended Amines for Co2 Absorption in A Hollow-Fiber Membrane Contactor

Modeling and validation of carbon dioxide absorption in aqueous solution of piperazine + methyldiethanolamine by PC-SAFT and E-NRTL models in a packed bed pilot plant: Study of kinetics and thermodynamics

CO2 Capture with Complex Absorbent of Ionic Liquid, Surfactant and Water

Simulation and Performance Comparison for CO2 Capture by Aqueous Solvents of N-(2-Hydroxyethyl) Piperazine and Another Five Single Amines

Evaluating CO2 Capture Performance of Trisolvent MEA–BEA–AMP with Heterogeneous Catalysts in a Novel Bench-Scale Pilot Plant

Wetted‐wall column study on CO2 absorption kinetics enhancement by additive of nanoparticles

Evaluating CO 2 Capture Performance of Trisolvent MEA–BEA–AMP with Heterogeneous Catalysts in a Novel Bench-Scale Pilot Plant

Mechanism and Kinetics Study of CO2 Absorption into Blends of N-Methyldiethanolamine and 1-Hydroxyethyl-3-methylimidazolium Glycine Aqueous Solution